Search:

Type: Posts; User: 10_SS

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Generic EOBD Support? (KTM OBDII - ISO 1430-4 / KWP

    Is there any support planned for the ISO / KWP EOBD standard? Have a KTM here and only my newest $18 USB OBD interface works great on it, showing year, VIN, and many PIDs.

    My MPVI2 doesn't...
  2. Should work just fine, I have an extra E38 on my...

    Should work just fine, I have an extra E38 on my bench with power, ground, and CanH+CanL wired to HPTuners, and this WB, and works same as being in car. No extra resistors needed.
  3. Replies
    17
    Views
    4,939

    The reason is adding the feature back, wont make...

    The reason is adding the feature back, wont make them any money. Spending their time adding new cars, and re-designing the interfaces ever so slightly, and having people upgrade them every year,...
  4. Replies
    19
    Views
    9,163

    Yes, the VCX software itself (VCX Manager) is...

    Yes, the VCX software itself (VCX Manager) is fine, installs no problems, at least for me. The problem comes when you try to install the hacked Tech2Win and MDI software which is hacked/crackked. ...
  5. Replies
    19
    Views
    9,163

    Just FYI - Used the new Techline, $40...

    Just FYI - Used the new Techline, $40 subscription, and a knockoff VCX Nano to flash my $27 EBay E67 from 2006 Malibu to a 2012 ZL1, simply using Manual VIN, on the bench. No other modules installed....
  6. Replies
    10
    Views
    3,673

    I run a Megasquirt MS3X on my Whippled LS3... ...

    I run a Megasquirt MS3X on my Whippled LS3... driveability is much better with this because you dont have the lean/rich narrowband 02's switching constantly... if you run a manual trans or lock...
  7. Replies
    55
    Views
    17,941

    says it comes with new Pro-Link, but I'm with you...

    says it comes with new Pro-Link, but I'm with you on the "getting expensive", I assumed since it had BT, it would work with Iphone BLE already, and since it had a USB-C port I assumed it was already...
  8. Well of course it's easier to exclude it. Even...

    Well of course it's easier to exclude it. Even if you had to sync with HPTuners/Win10 clock, and it kept time even remotely close, would be fine. Pulling time from a RTC is nothing, and cost a...
  9. I was surprised and disappointed to realize this...

    I was surprised and disappointed to realize this as well. For this reason, I don't use stand alone logging. I mean, really, how hard would it have been to add a RTC chip and small batt. Not hard....
  10. I had that idle take off happen after flashing...

    I had that idle take off happen after flashing once as well, not with WOT delay, but just from medium load spark timing. Same year. It only happened if I did something with the throttle, like...
  11. You can easy tune your normal driving with LTFT. ...

    You can easy tune your normal driving with LTFT. Easier and just as accurate as a Wideband with less work since it's already telling you how much correction you need.

    Wideband is most useful for...
  12. upload your log, the Charts look like averages...

    upload your log, the Charts look like averages from all of the data, which are how I made my conclusions... not good.

    The after cat O2, not really needed, just used for OBD Emissions...
  13. Your 02 B1S1 voltage is around 0.003mv, which is...

    Your 02 B1S1 voltage is around 0.003mv, which is low, is it not connected? Could be bad. You need to add that to the plot, see if it changes. It should be moving 100mv-900mv multiple tiimes per...
  14. You talking about the GoPro Labs firmware? Even...

    You talking about the GoPro Labs firmware? Even GoPro says that their own software may not read the larger 12gb files, unfortunately. Not sure what GoPro's problem is and why they dont fix it.

    ...
  15. Replies
    3
    Views
    1,252

    send this to support, they will look into it that...

    send this to support, they will look into it that way.
  16. Replies
    1
    Views
    1,226

    Something like this, over CAN: ...

    Something like this, over CAN:

    https://forum.hptuners.com/showthread.php?81694-AEM-30-2224-8-channel-EGT-CAN-via-Pro-Link
  17. It should be plug and play with minor changes the...

    It should be plug and play with minor changes the current LS3 tune if your reusing your injectors and coils. This would be mainly updating cylinder size in the tune.

    Then:
    If you can find a...
  18. Replies
    13
    Views
    2,565

    Fueling probably isnt right, best to fix that...

    Fueling probably isnt right, best to fix that first. But, it should be on that same page, down farther. Injector Timing/Boundary. This can clean up a stinky fuel smelling idle, and make more...
  19. Replies
    13
    Views
    2,565

    Adjust your Injector Timing at idle rpm, start...

    Adjust your Injector Timing at idle rpm, start with 50rpm increments. You should see a difference pretty quick. This is something often overlooked, for example I adjusted this and by doing so AFR...
  20. I bought a XGPS160 and after 3 full days of...

    I bought a XGPS160 and after 3 full days of trying to acquire signal, i said heck with this, sent it back! So odds are, it's the XGPS160, it sounds pretty flaky, even when it does work, accuracy is...
  21. 100hz is pretty good :) 500hz.. that's pretty...

    100hz is pretty good :) 500hz.. that's pretty crazy. Do you know the realistic response rate of the sensor itself?

    Any chance of making the "flasher" and some form of flash bin for each...
  22. Good news! I swapped sensors, and now my buttons...

    Good news! I swapped sensors, and now my buttons in car work! Also, so far with hot restarts, analogs start working right away! :)

    The old sensor, on the bench, acts the same way as it did in...
  23. That's affirmative.. new unused sensor, plugged...

    That's affirmative.. new unused sensor, plugged into car (not mounted on exhaust pipe), menu's work with both gauges! So strange.

    Only thing unchecked now would be the sensor body ground...
  24. sensor itself does seem like a long shot, that's...

    sensor itself does seem like a long shot, that's why I was asking the Dr.! :) Who knows, maybe there's something in the code. Not sure why it would work on cold start every single day, but...
  25. how? Only thing remotely possible would be AEM...

    how? Only thing remotely possible would be AEM ground, no?

    AEM 12v+ goes to the main 12v+ feeding everything else, including Megasquirt.
    AEM 12v- (gnd) goes to the main ground feeding...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4