post stock tune.
can you reduce the short pulse limit to 3.0?
-Carl
Type: Posts; User: jpracing01
post stock tune.
can you reduce the short pulse limit to 3.0?
-Carl
Im one a 50% scaled tune and half IFR/stoich trick. I cant get this thing to lean up at idle.
Thanks I will have to try that. I didnt think about doing that.
how do you get ID2000s injectors to fit with a 50% scaling?
What other info do you need?
1000HP on e85. Wideband show fuel cut when it wants to die on cold starts.
The truck will not stay idle until it warms up. It will bust off but will die if you dont keep your foot on the throttle. I attached a scan of this happening. Even if the truck is warm it still...
I was able to recover the ECM by bench flashing it but the pwr relay still clicks away when it is installed in the vehicle.
tune is scaled 75% for ID2000s
here is pretty much stock file
nevermind
here is the file,
Unable to locate VCM
Got another ECM and the clicking went away. I did a security relearn and was able to turn it over.
I read the ecm and everything was operating fine.
I went to write entire and about 2min into...
Can't remember exactly but something like can't connect?
I was trying to figure out if the my tbss or the ECM was the problem. When I swapped ECMs in my buddy's tbss and turned the ignition now, pwr relay clicking away like it does in mine.
If you...
Put my ECM into a buddies tbss and it is doing the same thing. Pretty much narrows it down to the ECM now. Guess u can fry a late model ECM
How is the PWR/TRN relay wired?
With key off
87 pole = ground
30 pole = +
86 pole = +
85 pole = open
With key on relay removed
Removed ECM and TCM, connected battery and PRW relay isn't clicking now with ignition on
Well I had the battery tested and all is good there. It showed that the battery with 83% charged. I put the battery on the charger and charged it to 100%. Installed into the truck and I still have...
nope, didnt turn on anything or mess with anything
I was uploading a tune via write entire and halfway through the process, the pwr/trn relay started clicking continuously. Now the truck will not turn over and the relay is still clicking. I changed...
tune is off.. injectors seemed off
I would download a stock 2008 tbss file from the repository and compare the two. There are a couple thing that stand out their to me. For some reason, they...
OK so for a 190lb injectors with e85, I could divide the IFR by 3 (190/3=63.3) and multiply the stoich by 3 (9.7*3=29.1)
Nice numbers....
Might want to check the siphon tube on the bottle... What brand on bottle is it?