They are on my to do list, no ETA sorry
Type: Posts; User: Chris@HPTuners
They are on my to do list, no ETA sorry
These ECU's are not readable, you are provided a stock calibration when you read (as the message says).
It means the PCM is adding timing becuase there is no knock. You can log Knock Correction to see exactly the final result. The standard Toyota PIDs are a little cryptic with all their non-zero offsets
Please download and install 4.5.417 should fix your problem
No ETA but it is being worked on.
make sure you have the latest 4.5 Beta installed. If still having problems create a support ticket.
Toyota's E85 code calculates an additional fuel multiplier (like a fuel trim) based on the calculated alcohol % instead of adjusting the stoich value as GM would (although it has the same effect)....
Customer never reported back :shrug:
If you want to test, please create a support ticket.
No plans at this time sorry
Pretty much all Toyota's take the speedo cluster input direct from the ABS controller which calculates the speed from the wheel sensors. This signal is then passed on to the PCM which calculates it...
You are correct, VCM Info file is all that is needed. If you have actually read your vehicle (virtual read) sending that file to us helps speed things up becuase it contains extra info.
I believe we can do this, i'm waiting on test results to come back from a diesel customer.
There are tables i have yet to add to the editor that are used in the load calculation.
No plans at present, sorry i missed your post! I have added some support for the 1UR-FE (4.6L V8) in the Tundra.
There is no chance. The CPU used by Toyota isn't very well supported by many s/w dev tools and also the available RAM space is very limited.
working on it now, if you raised a ticket it will be done today most likely.
We follow the Toyota process which includes validating the file after the reflash which takes a bit longer.
We announceed 18 support a few days ago
https://www.facebook.com/HPTuners/videos/347013202868493/
it could be a bug, please open a support ticket so our engineers can check the table in question.
MAF Sensor Voltage isn't an available PID unfortunately
You don't require licenses to save files in VCM Editor (a new feature since 4.0)
It sounds like you have only licensed the ECM as the TCM, FSCM etc. require additional licenses (credits) to tune...
PWM EV (Electro viscous) and PWM_MRF (magneto rheological fluid) are engine driven PWM controlled fan systems, the PCM controls the "lockup" of the fan clutch. PWM Electric is a PWM controlled...
i will have to be dead before i get in a self driving car, you know who writes that software right? the same morons that write the current auto software...
The problem is GM changed the format of the NVRAM section of the flash a couple of times in the later E38's. We don't write that section (normally) and writing an OS that is of a different format to...
I already added some testing support for the FJ, if you already have our product, create a ticket with a VCM Info log.