Thanks y'all. I did change the ignition coil, I got a ZZP coil. Didn't fix the issue. I'm almost certain that the issue is boost on the top RPM range, and I did adjust accel threshold to start...
Type: Posts; User: f22b2accord
Thanks y'all. I did change the ignition coil, I got a ZZP coil. Didn't fix the issue. I'm almost certain that the issue is boost on the top RPM range, and I did adjust accel threshold to start...
I haven't installed the wideband yet, but I don't suspect fueling. Afr commanded is 11.88, and is on stock turbo and stock injectors. I sense it's valve float or tune related.
As far as turbo...
I've been doing an unhealthy amount of reading on this issue from the forums here and all over the internet for days. Even after reading and testing for weeks, I can't figure it out
Hello. I recently bought a 2014 Sonic manual transmission. Vehicle came with ZZP exhaust and downpipe, ZZP intercooler and bigger throttle body, ZZP thermostat and a ZZP tune. With this and any tune...
Yeah, I'm aware of MAF fail procedures, thank you. I'm more curious about idling timing and fuel curves, to see where most people set their tune at. I have a wideband on the truck, so I'm capable of...
Hello, I'm working on a 2002 GMC with a stage 2 Texas Speed cam, air intake, exhaust. Stock header and catalytic converters. I started with an SD tune, but I believe the tune file isn't set up...
I flash and read a 2003 Ford F150 lightning heritage 2 weeks ago with an mpvi2, reduced fuel a little bit, and added a little extra timing for 93 octane. Read and wrote no problem
Hello, I recently worked on a 2003 Ford lightning, did some tuning with an mpvi2. I want to work on a couple of Ford trucks, one a 1999 and another lightning, a 2001. I'm going through the supported...
Hello. I'm working on a 2016 mustang 5.0 manual with basic bolt ons. I read the vehicle and have minimum understanding of the tune, asides from commanded afr in lambda and timing, which is also...
Also, forgot to mention, the engine harness is from the 5.3, the ecu is also from the 5.3. the truck is a 99, the donor engine and ECU are 2000, both as the 2000 body style, not the square 5.7 engine...
Since the ecu is out of the 5.3, and everything fuel related is from the 5.3, we're just trying to see if this thing will start. The fact that the strater isn't receiving a signal is what's troubling...
As far as a segment swap, how would I go about that? And thanks for replying, I appreciate it
He used the stock fuse box, from the 4.3
Friend of mine swapped out the 4.3 to a 5.3 on his 99 Silverado manual 4wd. He's using the 5.3 ecu, out of a 2000 Suburban, both trucks have manual throttle bodies. I flashed the truck. Removed vats...
Okay, thank you. I figured out a way around it. The way I did it was reading the file out of the refurbished ECM. Gave it a 2006 Tahoe Vin number, then licensed that, and Bam! Thanks for the input
Yeah, I haven't talked with tech support yet, that's what I'll do next. When I read the new ECU, the program asks me to enter a VIN number for the new ECM. I try using the same Vin for the truck, but...
I flashed a 2005 Tahoe. The old ECU took a dump. We ordered a new/refurbished ecm for it. When I try to flash the previous licensed file, it shows a message of "unlicensed vehicle". When I read the...
Thanks. Yeah, the issue is having the monitors as not supported, here where I live, even one showing not supported when it should be, will fail emissions, so I'm trying to figure out if anyone else...
I've worked on a couple of Chrysler cars, and whenever I try to delete certain dtc's, I either get the code to return (if I set ses enable, and mil off), or the monitor shows as not supported (if ses...
Thank you very much! I now feel confident to help this dude out! Appreciate it.
@Sharmz message me if you can, I'm very interested in Toyota tuning
Hello everyone. I am helping out a friend. He has a 78 wagon with a 5.3 swap, with a turbo 400 trans, walbro 255 inline pump with a corvette regulator. He got a camaro SS 2000 ecm. It's running...
Hi, I'm working on a 2011 cruz 1.4. The owner of the car installed a used trans module. Now the car won't work, it acts like it's in neutral in any trans position. Any suggestions on how to fix it,...
@Bill thanks for the response. Any works in the developing stage, or no support thought of as of yet?
@Jn2 I read that also, thanks. I was looking for the ngauge but not lucky........