I have a 2006 Ion redline and Im trying to get my Wide band wired through my ac pressure switch. I connected it through the red and black wire and got everything set up. When I try to use the...
Type: Posts; User: shawnrandolph
I have a 2006 Ion redline and Im trying to get my Wide band wired through my ac pressure switch. I connected it through the red and black wire and got everything set up. When I try to use the...
Filling up with e85 helped my trims a ton. Before with a couple of gallons of gas the maff stft and ltft were all over the place. After I filled up there very consistent 3% or so.
I am 100% maff...
how do I find the pid of a sensor. When you click on them it does not say. I have been just looking up every one I need so far
I have moved the timing quite a bit and have no knock so far. I have not been beating on it though till my fuel is straightened out. My trims are very very close like within 3%.
I do have to...
Okay first off I am not looking for a handout of tunes to try. I have a tune ive been working on for some time right now. Ive been reading anything I can for about 2 weeks before I converted.
I had...
Let it play out till the end and it should show way over maxed out
I've got to have something messed up. On my scan it was way over 215 kpa quite a few times. Would it be my cfg screwed up
I have a 06 redline with a list of mods. The problem I am having is in HPT I set up my map sensor pid and it was reading good and it was just a hair under kpa at wot. My physical boost guage says...
Hi to start off its a silverado 1500 4x4 with a 4.8L
I just fixed the knock sensors and then the intake gastket leak.
It has a AirAid cold air kit and a tune from me for trans shift point and...
Im trying to read my iat2 sensor while I drive and im from the 3800 comunity. For some reason this is being very difficult. I have a log and when I set up the histogram all it reads is -40 degrees...