I have a 2019 L84 truck and we just installed a TSP Non DOD 6.3L L83 Cam w/VVT 193/199 .502"/.494" 113+6 Camshaft in. I am trying to just turn off the DOD and it will not idle. The cam is not...
Type: Posts; User: 30thta436
I have a 2019 L84 truck and we just installed a TSP Non DOD 6.3L L83 Cam w/VVT 193/199 .502"/.494" 113+6 Camshaft in. I am trying to just turn off the DOD and it will not idle. The cam is not...
While researching I read some of your other posts expressing frustration with the process. How long does it take to get a file converted? are we talking minutes or possibly hours to a day?
Just trying to get familiar with these PCMs and I've done some reading about the VE Neural Network Trainer. But on this file, it comes up blank. Is there something special I'm supposed to do to...
a 2004 C5 will randomly command 16.0 AFR while driving, and I don't know why. Any ideas?
Tune and Log attached. Happens at 12:39 on the attached log
I have a 2002 Camaro that I did a P59 Swap on to run Flex. I started with a tune from a 05 Avalanche, Trans Segment Swap for Manual Trans, 3Bar OS Conversion For Boost, and copying my previous tune...
How would I define my own "spark blend factor"?
Is this true on all trucks? I have a 2016 Escalade. X1 pin 38 is occupied, but I can?t for the life of me find the connector under the truck.
2013 5.7L procharged Charger is pulling Timing during shift and I don't know why. Log and tune file attached. any help would be appreciated.
I have added to startup air and was unsuccessful
I tried several changes, and don't feel like I made any progress.
Current Tune and Log Attached. Any insight as to why there is such a...
Just starting. NN Off. When I turn on, it doesn't want to run.
In order to reduce fuel in the startup pulse width, I would increase the values in the affected area correct?
Are you meaning pull fuel out of the VE?
Car is 2010 5.7L A5 with 220/230 .596/.582 114 Camshaft, Long Tube Headers, No Cats, BBK 85mm Throttle Body and BBK Cold Air Intake. I have 2 issues.
1st. The car must be throttled to start. ...
Switched to 2006 Silverado OS and all is working as it should. Lucky I had the 06 Manual File to swap over as well
I did not notice any timing advance with E67%. I thought I would have seen at least 5* additional. Any ideas why?
Vehicle is a 2013 Charger RT. I just changed the rear differential to a 9" with 3.25 gears. I changed the speedo in the scanner with the special functions tool to 3.73 gear and 28.1" tire. As soon...
Did anything come of this. I have a NA FFV that I would like to remove the Flex Fuel OS from.
Is there a way to enable PWM on the P59 PCM so that a 98 camaro fuel gauge works? Do vans use a PWM sending unit? I can make it work on a 411. But the P59 will not change reading.
Is the LT4 Baro Sensor located in the MAF like the LT1, or does it have it's own Baro already? I am switching to a procharger setup and want to make sure I get the correct PRatio.
Yes, sorry 32% fuel lobe
It seems that no matter what I do to the idle it stays at 950rpms. what am I missing to lower the idle to 750? I tried copying some 5th Gen Camaro VE coefficient tables and even that didn't work. ...
Cam - TSP 218/226 .635"/.635" 113LSA 109ICL
1 7/8" LT Headers Off Road Y-Pipe/ Stock Muffler
Air Aid Cold Air Intake part number 202-361
This did not increase my max torque value
I am trying to tune a 2016 Silverado with small cam and Long Tubes, and am following the tuning school method for virtual torque. I am trying to increase the max torque in hopes to see full...
I am in need of a stock 2014 V6 Mustang File for both automatic and manual. If anyone has these and would share I would greatly appreciate it.
Can anyone tell me why the throttle is closing at around 4500RPMs? I have messed with driver demand, peak tq and the virtual tq, but I cant keep the throttle open and I don't know what is causing it...