Yes that's what I have for the offset. I double checked the original. (At least original as I found the the ECM in the bottom of a box with 2 interior harnesses.)
Thanks again for looking!!
Type: Posts; User: o2l8
Yes that's what I have for the offset. I double checked the original. (At least original as I found the the ECM in the bottom of a box with 2 interior harnesses.)
Thanks again for looking!!
Okay, an update and I will include the log file and tune file.
LY5 VVT delete, DOD delete.
Had it running MAF with the stock truck ECM but wanted to use the CAMARO pedal and the input for the AC...
Reading until my eyes bleed, I still have a few questions regarding the set up.
The donor is a 2010 Silverado E38 ly5 with a Sloppy Stage 2. I find conflicting info on these questions.
Is the tab...
THANK YOU so much. It will give me good place to start!
Thank you I guess that should have been obvious.
Has anyone cloned a GMPP or an E-ROD for circle track?
I have an e38 from a 2010 pickup I want to put in a circle track car with a Saginaw 3 speed. Can I use the automatic ECM and modify it to work or do I need to reprogram the ECM with a Corvette bin...
Thanks for the reply.
I plan on using the 5.3 in the other truck also, so I guess I will upgrade the fuel system when I do the turbo.
Right now I just want to swap the 2 motors.
If the 5.3 wasn't...
My thought is too keep the flex fuel injectors and fuel system for a future 4psi boost project.
My question is what to use for a base tune as the 6.0 is not a flex fuel. My thought is to use the...
I have a 99 5.3 in a truck that will soon be a donor for a 46 Chevy truck.
The question I have is what is the complete order of operation with the EGR system?
The EGR tube broke off on the truck a...
Is there a way to use a ls pcm? Just use 4 coils,4 injectors?
I have built and my son raced a big cam ln2 (97 2.2 ) but it still requires the key and dash to be retained. Can I swap an OS or some how eliminate the dash and key and just run it like an ls? I have...
I doesn't except my application key I just got via email.
Had to update the programer, works great now. Now I have to rebuild the config/channel files.
Thanks for this!
Got it to run ok made a shall change at the track.
Copied AFR ERROR% to the corresponding tables paste special, multiply by%.
Going to try it again tomorrow.
Weird thing is it didn't want to...
Ok,going to the track now. Got it pretty close. poke and hope.Lol
Changed the constant to .2016 and richend up the idle and its pretty close.
Will log today and see what we come up with.
Universal injector spreadsheet link is dead, can someone share it please.
What should i expect to have to change in the ve tables?
When I first got it running with the big cam I had to lean it out quite a bit to get it to idle and richen it up later in the RPM.
Should...
This motor originally had side feed injectors. the closest thing I can find is it says it's 17 pounds per hour. The new injectors are 23.8 pounds per hour bosch injectors. According to the help file...
I built a 97 sunfire for circle track racing and now the injectors are too small.
leaned right out at high RPM. and injector duty cycle is at 100% for along time at RPM.
I made the top feed...
A 97 sunfire Circle track car. many mods and now running out of fuel injectors.We are at 100% duty cycle for a long time and leaning out very bad. After installing a top feed rail and getting the...
Now our injector duty cycles are maxed out.
Is there something besides the top feed conversion I can do?
I don't want it to look like it is altered, although it is legal in our class.
Keep us posted, I did this with the egr but had to create a custom pid the afr error wouldn't log.
Let me know if I can help.
At the bottom of the pid list is a user defined that is your afr through ac. Use that it should be [USER.9004] or something like that., I tried everything. But this worked :...
Found a solution,
100*([USER.9004]-[SENS.121])/[SEN.121]
Should be: 100*([USER.9004]-[SENS.121])/[SENS.121]
It is a real new version, so I don't think that's it.
The stock afr error would nt...
:banghead:I am having trouble setting up the AFR error:banghead:
I am using 2.23 beta
LC-1 hooked up through the egr position
The AFR agrees with the gauge so i have that setup properly.
If I...
I can see how that might happen. If you just subscribe to new posts, it may have appeared you were appeared the cart was in front of the horse giving advice without knowing there was no map sensor....