So any update on the tcm functions? I need to calibrate a speedo for tire size. 2012 wrangler
Type: Posts; User: speedyss
So any update on the tcm functions? I need to calibrate a speedo for tire size. 2012 wrangler
I see this as well, Im using 2.25 editor, will paste special work with 2.25 scanner?
ttt, to find out about getting down to a 1.6 ipw? or just a way to get less than 1.9?
Just wondering if yet anoter? year later RTT was on the board yet for gen IV's?
Any time frame on when we will be able to enable auto tune function?
ok, thanks for the info, i couldnt imagine 250F was too hot. I found the problem today, as you know aluminum expands more than most metals with heat, well i was running an engine 230F-240F and the...
Nobody knows what the temp limits are of LS1 VCM's? or any vcm? I would think cars sittin out in the hot sun would build some serious temps, but when is hot too hot?
Whats the hottest you would want you VCM to reach before problems?
250 too hot?
Goodluck! lol
What kinda stroke you talkin?
Potentiometer+Zero'ed out bias charge= Total control
Been running it like this for years with great success.
How long do i have till i cant upgrade from my serial anymore?
cool thanks, you wouldnt happen to know what model number it is would you?
What ecm does the 07 Z06 have? Is it the same as the LS2?
mod list, i have race style long tubes and no egr or air pump, and im runing in sd mod all the time, no maf, untill i can tune my ve table in correctly.
i did this about a week ago and it didnt work, still had lean starts, hot and cold, i know its working cuz i can see it in hpt, when i change the pot postision, the temp changes, i can go from 20* to...
Can i use an maf on a 1 bar SD OS after i get the ve dialed in, in SD mod?
how can the sd tune remain the same with the change in temp and alt. I have a problem runing sd for day to night i have to have 2 tunes to make it run right, it runs richer at night, i thought this...
i deff want to get rid of that secondary ve table so i should get 1 bar SD, but i want to keep my MAF, can i still us it with 1 bar SD OS?
i dont know y i just posted this is this forum, it needs to be up one. sorry guys
I still have the serial interface and want to upgrade to the usb, and also get a new OS, i have a 402 N/A and want to run an MAF. What is the diff between the 1 bar SD and the 1 bar MAF, and can you...
I finely got my LM-1 working through my egr using a custom PID, but now i cant get my AFR Error PID to work, my formula for my Wibe band is ([PID.2811]/.5)+10 and my formula for my AFR Error is...
Ahh.. success, i got it to work, it was somthing so simple it makes me feel stupid, anyway yes i was looking at egr postion in volts, in the table display, and i had a signal, thats y i knew it wasnt...
I have my LM-1 hooked up through my egr position and when i check the egr position in volts, i get the right reading its just in volts and not an afr. Then i plug in my pid ([PID.2811]/.625)+10 and...
So basiclly when you run in open loop 24/7 and leave you wide band in, then your lm-1 is on but doing nothing but being on when you are not tuning, is that right? What do you do with the old NB02...
Also somthing i was wondering, when your done tuning with wideband 02's, what do you run when not tuning? Do you just plug your narrow bands back in or can you just keep your WB02's in and run only...