I have an E38 PCM from a 2013 Camaro SS A6 I'm trying to do a VIN change and install it in my 2014 Camaro SS A6. When I input the vin into the change wizard I get an vin/OS error.
See attached pic....
Type: Posts; User: scv_guy
I have an E38 PCM from a 2013 Camaro SS A6 I'm trying to do a VIN change and install it in my 2014 Camaro SS A6. When I input the vin into the change wizard I get an vin/OS error.
See attached pic....
I want to change the Vin on a spare PCM and use it in my 2014 A6 Camaro ss, The PCM was in a 2013 A6 Camaro ss. When I go to the Vin change wizard and input the vin i'd like to use I get an error....
I have had my MPVI for some time now and used it many times, the last time i used it was a week or so ago. I went to use it today and I got the invalid app message. I really need to get this up and...
Help!
Made some changes, still having the same problem.
I trying to learn as I go but it's getting frustrating!
Here is the latest tune and log...Any help would be great
I have attached two logs. One of cold start (not sure why the RPMs bounce for the first one of so then settle down)
second is the stalling when coming to a stop
I'll log it when I get home.
Still in need of help!
Would the Throttle follower have anything to do with it?
The tune is MAF only, the trims are currently -4ish so not bad. There has to be something I'm missing.
I have a flex sensor just trying to get the basic tune close before adding another variable.
I have a 2014 Camaro M6
it has a stroked LS3 427"
GT9 cam
On E85
I have the car idling fine (not perfect but ok) the current issue i have is when I take it for a drive and come to a stop when I...
The engine seems to idle ok, the current issue is when I come to a stop the engine dies. The cam is a GT9 it's very mild what do you suggest I set the idle to?
Thank you for catching that! I updated the map sensor offset I'm running a GM 3 bar map.
That helped greatly..it's still not great, would adding to the startup airflow table help?
i have a 427" LS3 with a GT9 cam.
just getting it running and i'm running into an issue during start up.
I have posted the log and tune any suggestion would be great, please keep in mind im new at...
I'm learning as I go, I halved the wrong IVT (I did the intake vale temp) I'll correct that and try again.
Yes I did...
I just installed the engine, it is a low compression 427
the build has a GT9 cam,GMPP LSX heads and 1700cc injectors (going twin turbo after the break-in)
The issue im currently having is I have a...
Can someone give me a run down on how to scale a set of 142lb injectors on my 2014 Camaro. The hard code limit is 127lb.
I have attached my current tune along with the new injector data
This...
As I said in my pervious post, I confirmed no vacuum leaks.
I know the injectors are good, I checked and confirmed no vacuum leaks. The strange thing is the problem is only at idle, during normal driving they are fine.
The car is a 2014 Camaro SS, the combo is nothing new.
LS3 (sbe)
LS9 cam
whipple 2.9
long tube headers
The STFT at idle are split B1S1 reads +3.1 or so B2S2 reads +30.5 I have attached a scan...
I just finished the install and loaded the tune. The car fires up and idles, the idles seems high, but my concern is it is pulling timing and i'm not sure way.
it is retarding the timing at idle....
bump
Thank you for the input, I'm fairly new to tuning how would I disable the burst knock?
Anyone?
Can someone please look at my log its very short, but I did see some KR and it seems like false knock but looking for a second opinion.
2014 Camaro SS
return fuel system
ID1000 injectors
E85...