following steps before installing your new TCM:
Step 1: Download and install the latest VCM Suite 4.5 Beta available at www.hptuners.com/downloads Step 2: Perform the ?Replace TCM? special function...
Type: Posts; User: TexasGMC08
following steps before installing your new TCM:
Step 1: Download and install the latest VCM Suite 4.5 Beta available at www.hptuners.com/downloads Step 2: Perform the ?Replace TCM? special function...
Looks like will be able to tune 07-15 AMG 6.2, C63,CL63,SL63,S63,GL63, and R63 @8 credits
x2 u cant max out the speed limiter which is 318 mph set it for 250
http://www.shortuning.com/
Update on issue... Had a faulty pedal sensor.. Truck is fine and with a happy customer!
bump
What ever is not used its Disabled.
Yes we are.. We can break torque it and once we do that the pedal goes dead and takes a couple cycles for the pedal to relearn its self.
It's hart to say if issues was resolved.. IDRIVEAG8GT is no longer with us R.I.P Robbie.
Well pre GM It's a ebcm communication issues. Might need to disable all TC functions or need a DBC TB . Brake TQ in TM is disabled.
It's the stock 2014 pcm. No codes.
If driven calmly the pedal response is good and works flawless. When tires break loose like in a power brake pedal goes dead until you key off for a couple of...
Did a LT swap in a 92. Ever since swap we have a dead pedal only in gear in ramp in WOT. You can pop the throttle in park and it responds. But in gear there is a dead pedal like when you Zero out TM...
is there a updated version out yet? Last update I have is 2013....
has there been any updates on BlueCat Trans Softwear since 2013???
Thanks Sam Miller!!
This should fix it... I fixed in person (due to handhelds) and I recall flashing them entire with a known good file..
Try a write entire with a known good file. You will have to license that file...
Thank you for Write up... Did a swap on a 92swb!! Fired right up!
Reubone what kind of vehicle do you have??
2015 5.3 maxed out Speedo reduced Engine power came on when flashed. Set MPH to 175 and Reduced Engine went away!
did a swap in a V6 4L60e to V8 TH350 and speedo is off can you shin some light on the fix??
http://www.hptuners.com/forum/showthread.php?10993-OMG-why-does-my-TPS-only-read-88-at-WOT
PM me if you want help
Need to keep Abuse Mode Stock. It pull Advance Torque Mgmt timing if changed
Under Trans> TQmgt> Abuse Mode> Leave the two tables stock NEVER zero out on car or truck That's what is pulling timing ( Torque Reduction, Reduction Duration ) Leave both tables in Stock form.
Tunning school has a book for 6speeds and you can use Bluecats on shifting, WOT shift, RPM and TCC