There is no VE table. (07 vette)
Type: Posts; User: KCFormula
There is no VE table. (07 vette)
Anyone been able to create a VE AFR Error histogram from narrowband 02s? It says perameters not supported. I have tried to manually input the table and its not there, and I have tried to use LS2...
I made my own tables but the values just come up as 0. I know its something stupid I am missing but I don't know what.
This is my first time using the 2.5bar OS. I can't get the scanner to build a VE histogram, it keeps saying the PCM doesn't support it.
I recently noticed when I use a config file that has a MAF PID my MAF is stuck at 31, is this right? I would assume it would read "0" with it turned off in SD mode. Is there a setting I am missing?
I am having trouble logging at 0 tps because the car will not run at that TPS which makes it difficult to get any good A/F data logged. How do you guys go about doing this? Can I raise the point...
Bill has always been more than availible for email help! One thing I did not expect when I chose HPtuners! (but a very nice perk) :cheers:
I've got some BCM prob's with other vehicles I own and would love to be able to deal with that. Any chance of future acess to BCM info?:cheers:
I have no direct compare table when I scan since I am not running O2s. I am in open loop full time due to leaded gas.
Thanks:cheers:
I am trying to lower my EQ ratio to lean out the mixture. According to my wideband its rich pretty much across the board. I am trying to figure out how to convert what I want commanded to the EQ...
I am having trouble with the fuel tuning on my 1bar OS. I have linked a tune and a scan for what I think the changes should be but the commanded a/f numerals are confusing as I cannot find a direct...
I think I got everything working but on the first data log when I would assume the car would be lean it came up rich? Is there a way to check the calibration on the sensor?
I did the "free air...
I feel like I have searched and searched and was finally ready to hook up my wideband the other day when I came across something I have not seen before in any of my readings. My LC1 did not come...
My LC1 came in today. After a little more research it looks like a little more work than I thought to get it going. Hopefully I'll have it by the end of the day though. Thanks and I'll let you...
OK well I ran into another problem. I only have an extension for 1 of the 02s. With my old headers I only needed 1. Would it be bad to tune both banks off 1 o2? or would the PCM assume split BLMs?
Last year my car was tuned using a 1bar OS. I made some changes over the winter and was wondering what the best way to fix the A/F so that the car will idle. As I understand it the 1bar OS tune...
In case anyone else needs this information this is the email I recieved back from Bill.
Available from Digikey.
White connector:
Molex 22-01-3087
Pins:
08-56-0110
I have the original black box with the interface option but when I was looking for my cable this month I seemed to have lost my white adapter to attach my wideband. Does anyone know where I can get...