Search:

Thanks for the info!! Does anyone know what states 3-7 are for?

Has anyone played with cooling fan relay control? We have 2 e38 ecu ls2 engine conversions that have been wired to fan output 1 as a relay control switch but fans come on constantly once started. Fan...

Does anyone know what causes a Rich commanded afr when in open loop? Initial start up before closed loop activated commanded afr drops to 9.0 and engine stalls out. Once in closed loop 14.6 and all...

Does hp support 2014 grand Cherokee 3.0v6 turbo diesel?
Operating system 68270625AE engine
52108926AE trans.
Have one in I'd like to tune

Does hp support 2014 Jeep Grand Cherokee 3.0 V6 turbo diesel? Registers vehicle info and operating system but no hardware for definition

So has anyone ever had to remove vats out of a v6 alloy tec?
Nothing in editor to switch off? Injector driver failed in an ECU so customer supplied another ECU, couldn't link via scan tool from what...

Thanks for that, I'll set it up

Have we lost the pid for injector duty cycle in logging? Can't find it for LS1??

Thanks mowton, I'll check it out and see how it goes.
I found the data in the old thread but didn't work very well was super rich and ve table were in the teens to get to lambda 1 even with inj...

Does anyone have calibration info on the White Bosch 36lb injectors? Or know where to find it? Thanks in advance

You got knock ears to see if it's actually getting knock?

Yeah I thought that, rang eagle and they don't lock ecu's so they say. I am tuning for the builder they have just installed the crate engine. I've sent a log file to support hopefully it's not locked...

Got version 3.2.99
Custom car with a ls3 crate engine from eagle auto. Can data log and scan no problem, can gather info but can't read file. Comes up controller unlocker x36 exceeded number of...

And was vf

Was on ign.
The issue with acc is when doing an os change and write entire it might switch off b4 finishing

6.2 e38 and after a few hrs on the Dyno the last write calibration seemed to brick ECU (my first ever so freaked out). No previous issues, pretty much a brand new car, only had engine mods no...

So I have vehicle type group Gm gen 3 (ls1 based) v8 cars licence but have just read an ls1 that comes under that licence but saying I need to purchase credits??? Anyone had this and know how to fix?

6095560956
Ive attached log and ecu files, whats supports email address?

All good, found it. Had to select mpvi pro 1 then transform and select oxy sensor autronic

Hey guys just wondering why my scanner has lost the Mvpi.1 autronic mafm1 pid for data logging? Can't find it to add as a channel for afr err???

I'll send file and log file but won't read any pids, only sae basic pids. Like no support for my ECU

Can someone please help, running version 3.2.11 and have 3 ba turbo falcons to tune but missing a lot of pids for correct data logging in the scanner. No air load, cam angle, desired boost, wastegate...

early ls1 and ford ecu's, I updated again and LS1 came good, would show up no definition file as well. all good!

Cheers bud I'll download it on another lappy and see how it goes

What's the best scanner for logging ba xr6t? Using 3.0.112 does the older versions have better scanning ability? Or go another scanner all together? Can't get cam angle or map
No inj duty cycle or...