Search:

Never tuned for a cam before, 233-243 655 660 118lsa lmr cam, currently have long tubes,off road xpipe, b&b exhaust, v3si blower and alkey meth, i installed dod delete and cam phaser, ls7 lifters,...

moved

Yes i have ait chart set up to pull out quite a bit thanks ben

And how much timeing can i run on 100% meth

also im only seeing around 8lbs of boost with my new pulley installed had a 3.8 now running a 3.6

ok I got my maf tuned out so commanded is same as my wb a/f , look at my log its two gear pull 2-3rd im seeing some knock now, running 12.5a/f on wb and my commanded is 12.5 , see if you see any...

alright ben I got the pid thing corrected, so here is a idle log using your config file u sent me awhile back, I did add my aem wideband to it so ill send it back to you.

Thank you thank u thank u ive spent hours trying to figure out why I had only a few pids, its working great now!

Ben that last config file u sent me had several unsupported paramaters on it. Didnt know if i did something wrong when i used it?

Only logs in lb/min lb/hr lb/sec or g/s

Then I'm trying to log maf freq in hz its bot in my pid list only in user defined and i cant get it to work

Timing At 14 with no kr so far

I raped the pe table to adjust the a/f i havent done a ve table adjustment before im really new at this still

Yes aa kit ill post a log

14 degrees

Which tables need to be retuned? My a/f still looks good in pe but at idle seems to run little rough.. Thanks guys in advance

See if you see any problems since tweaking a/f in pe was running 11.3 now got it up to 12.0 area. do u see any other problems thanks guys

Cant find the right sensor... This is for my boosted c7 thanks in advance

For blown c7 thanks in advance

Ill get my a/f to 12.5 im in process of wireing up methonal alky kit do i try to go for same a/f or let it run rich on the meth? Also 50/50 or 100% meth do u guys recommend

Thanks ben thats what ill shoot for..

im commanding 12.5 in pe but getting 11.5 on my a/f meter, do ineed to adjust the maf now to achive my 12.5 on my meter? Thanks in advance guys

My commanded a/f is 14.1 my power enrichment is a 1.128 on the top end. im running 8lbs of boost right now, at the track my new aem meter read 11.5... and it is on a stock compression

went to the track last night with my newly installed aem a/f meter, ive been having past power issues with my 2014 stingray, ran a 11.8 at 120 1.9 60' time at a density altitude of 3300'.....my car...

Ben look at this log my tps is only going to 84% at wot