Copied 6.0 tables from a '12 2500 6.0 for the swap.
On the first cold start of the day the tps will hang right around 17% and then it seems like it starts to pull timing to get the idle down, so...
Type: Posts; User: cfaluck13
Copied 6.0 tables from a '12 2500 6.0 for the swap.
On the first cold start of the day the tps will hang right around 17% and then it seems like it starts to pull timing to get the idle down, so...
So Im noticing that on a cold start after about 2 min of run time the ecm is commanding 600rpm idle speed.
But the engine is staying around 700rpm when its surging. I've added in the VVT parameters...
Here is a log from this mornings cold start. You can see the timing starts out oddly low around 1-2 degrees, then slowly goes negative until it starts jumping back and forth causing the surge.
...
The new engine is completely stock so it still has it, but left it disabled in the tune to possibly eliminate any weird issues I thought it might cause.
Think I should copy those over and turn it...
Trying my first time to copy/paste a 6.0 tune to the stock ecm. Copied everything over from a ly6 tune because I was under assumption the new engine was a ly6. Seems to run just fine besides cold...
Any ideas on when these will be available? Trifecta is selling tunes for them somehow now but its not on the list on Hptuners.com
Ok somehow saving the new file after making the changes and updating the app key to put the credits on his vin it saved just the original stock file, and that's what I reloaded back into the truck....
I have a 2014 5.3 Silverado that would simply like the Displacement on Demand turned off. I went about changing a handful of the parameters for Dod to values not reachable and it still kicks into Dod...
Just wanted to update that the 3.0 scanner is working excellent!
Pins 4 and 5 of your DLC are the grounds. They are respectively the 4th and 5th terminals from the left. Can check them to pin 16 which is the battery power terminal on the bottom right of the...
Check fuse 25 in the left Instrument Panel Fuse block, it's a 10amp
I cannot create a histogram as the "Insert Table" is completely blank.
[QUOTE=silverado08;410146]i just changed my os to sd also with exact same problem let me know if u figure it out[/QUO
Will do.
I was able to flash the Pcm back to stock with an MDI and GM programming. Then flashed my tune back in with HpTuners and still no luck being able to log data properly in the scanner.
Any new ideas guys?
Yes, I was just showing that none of the histograms work even on another laptop and even with a default config.
Never had this issue until I loaded the new OS
Just tried to scan the truck with the basic 'Imperial config' that comes with the software on a different laptop and it seems that I'm still having the same issue here.
Could the new 3 bar operating...
Deleted everything in the 'Vehicles' folder as suggested, still no cookie.
54511
Posted this over on the GM Gen3 V8 board and have had a few good ideas to check, but still haven't been able to resolve my issue.
...
I haven't been watching any log files while attempting to get this done.
I'm stumped, I would love to be able to tune my truck
I appreciate the input but none of that seemed to help. Having the same problem even after updating my 2.24 software and with an old config that worked flawlessly in the past.
Any other ideas?
...
Im just starting to write my 3 bar SD tune on my 2002 Silverado. I was about to create a AFR Error histogram but some how all the normal histogram data has been wiped out. When I go in to reconfigure...
Why not just put stock injectors in it and drive it to the tuner as easy as possible on a stock 2500 truck tune. Then swap the injectors over once your there.
44535
While trying to get a ghost cam tune going n my friends 2012 f-150 I noticed this lable seemsto be incorrect.
I was also unable to get anything to change in the sound of the idle.
After...
Yes that pop noise is very loud.
I believe it's from the subwoofer as only one of the trucks I scanned did it.
The one that did not 'pop' has a base radio.