Are there any plans for doing me7.5? Winols sucks balls.
Type: Posts; User: dewey04
Are there any plans for doing me7.5? Winols sucks balls.
I don't have a wideband yet but am looking at the Innovate UEGO sensor. Anyone know if it will play nice with HPT?
Innovate stuff works good you have to set up the voltage offset in the logging...
It will work but the touch pad is weird takes a little bit to get used to the texture its like bedliner. I bought the same one and took it back the next week. Trying to find one with a backlit...
That's pretty awesome news. I want to buy a 6r transmission now and see how it would work out in my cobra. I have a powerglide in it but 6 speed is tempting. How are the stock transmissions holding...
Are the doing the relays to the ecu or did they make a valve body?
I had to wire in a switch to simulate the key on and off for my bench harness.
If you add timing to the borderline it can not be higher than mbt spark unless you increase mbt spark. If you think it is torque management disable torque management and do another log and compare....
The data is off from what I use I can send you a pm tomorrow with the tables. What part number are the injectors?
They work good I used them for two years and switched back to fuel injector connection this year they also have data on the popular models I love their 95lb injectors and 60lb injectors. Deatchwerks...
No not to that extreme for the cam phasers. Try the auto ecu with the automatic disabled and delete any codes that come on.
Yeah done a few turbo 2valves they work good 400 wheel hp is easy with them. The transmission might be an issue depending on the power. Their is a list of supported ford cars on the forum. I have...
We usually lock out the phasers or limit them. Try setting engine>torque management>general>torque intervention- to disable. It might have a signal from the auto harness for a wire that isn't in the...
I had problems once with a trans swap but it was with another software and the equizzer settings in the ecu. The car had way different issues. Can you post the file from the auto car. Maybe there are...
Cable throttle body works on the cobra jet.
change the transmission>torque management>General>min ect- change it from -25 to 240 if you want to disable torque management in the transmission. I never messed with clutch fill times. If you have...
Check the wiring for the sensors if their okay then start looking at the tune. Was the only thing you changed the transmission before the problem happened? No fault codes stored in the ecu? Have you...
At the speed you want it to shift firmer multiply the number by 1.05 for 5 percent increase 1.2 for 20 percent ect. Then for shift time do the same but .95 for 5 percent reduction .8 for 20 percent....
Can you attach the log file and tune file? There is a few things that can cut spark so it is hard to tell what is causing it from the picture you posted you can just see that it is pulling timing.
Does anyone have a ecu pinout for a 2005 f150 box code is buf3 and also what pins are needed for a bench harness. Thank you in advance.
How many credits will the f series v8 unlimited license cost and how much for a v8 car license?
How is the credit system for the fords going to work out? Is there ever going to be an unlimited vehicle group license available? If I have a 2007 f150 year group license can I tune all of the 2007...