Any help?
Type: Posts; User: z28rob18
Any help?
I fixed the throttle hang since this log. I also made a fuel adjustment in the upper RPM where it went unsafe lean.
6036060361
Took the car to the track the other day to take a look at the tune and It was showing it was WAY lean during the burnout and when revving up at the line. The AFR is pretty steady around 11.8 during...
here's another short log I did after using the AFR error to adjust the VE table I think I have it going in the right direction. This is with long term fuel trims disabled maf disabled and PE disabled.
I bought the pcm with a mail tune on it for the car. The injectors are set from what I can tell. They're 42# injectors. The flow rate VS. KPA shows 44. I've notice stoich at 14.84 and didn't know if...
I have a 95 Camaro it is a 385 lt1 with the 24x conversion so it runs on an 02 pcm. the car runs and drives, but since getting my wideband working it seems its on the lean side and it worries me to...
your walk through helped the afr error reads when tuning with the wideband/AFR error do I leave PE mode enabled? I did a real short log with the car up to temp and its lean for the most part I'll...
For VE but I think your fuel trim how to should give me some guidance
That got it reading. Can you help me set up a graph/histogram for it
Trying to plug into the interface with the green strip
I need some help setting up my innovate motorsports lc2 in the scanner I found how to do it in the 2.24 and when I started using 2.25 and now 3.0 I can't figure it out. I've added the channel under...
I finally got HPtuners working had some issues but I scanned the car tonight and I have a bunch of codes that read MIL on second error. Codes from the TPS MAF coils injectors coolant sensors (which...