you can just reprogram the out put to what ever you want. i reprogrammed my lc 1 out put to read from 10-20 instead of the narrow band. also are you logging egr in volts? and you need to put the...
Type: Posts; User: marky_24
you can just reprogram the out put to what ever you want. i reprogrammed my lc 1 out put to read from 10-20 instead of the narrow band. also are you logging egr in volts? and you need to put the...
go to http://forums.corvetteforum.com/forumdisplay.php?f=1 and look at the stickys . could be corroded grounds, or more than likely its the column lock has gone bad and is turning on the anti theft...
I'm starting a turbo build on my 03 corvette and all ready have 1 bar sd applied. sooner or later I'm going to upgrade to 2bar sd when i turn up the boost, but until then would i be OK to use 1 bars...
have you tried to turn you idle down with the scanner? to see if it can be done with out fixing your tb
are you referring to me??? maybe you should read what i put. i just copied and paste everything i had saved from here and over at dp, never said i came up with it or anything :shrug: just the basics...
well some of this may or may not make sense i just copyed and paste everything i had saved in my basics folder, things i got from here and http://www.dieselplace.com/forum/index.php
It was your...
i have used it, and works great, was able to get enough power to limp the trans with in about 5-7 different tunes. i found it to be a very easy learning curve, ya just need to know what does what and...
use the run position, but make sure its as far forward as you can get it with out starting the truck.
on my 03 it did this to me a few time at first,fail on the tcm read/write, but if i turn the key so its almost starts but not start it, it works. just put the key in the normal position and then turn...
i think you are looking at the wrong tables, you need to look at base fuel qty vs tps on my 03 duramax its max is 91mm3 @3000 rpm. the other tables are limits
thanks! thats just what i was looking for
what kind of cfg are you guys using for scanning? i have been trying to set up some histograms and am having a hard time getting them to work how i want. i tried reading the help file and didn't...
ha ha well after some reading on the net it seems that the trany takes a while to get used to the new power level, i think they called it tranny learning , but after about 40 miles of driving it all...
is it tq management pulling fuel during shifts? or is there something else going on? working on my bros 03 dura with the Alison and i have been working on the tune and its got some nice power to it...