http://www.700r4l60e.com/store/product.php?productid=532&cat=55&page=1
This is the kit I went with. I believe it was the 3 to 4 accumulator piston that failed. I added a 4th gear Sonnax servo...
Type: Posts; User: posenheimer
http://www.700r4l60e.com/store/product.php?productid=532&cat=55&page=1
This is the kit I went with. I believe it was the 3 to 4 accumulator piston that failed. I added a 4th gear Sonnax servo...
I have a tune written doing your recommendations, as well as setting the borderline spark values at what the car is currently running during a pull in the appropriate cells. I will try it some time...
I figured I would ask here on the forums for anybody that tunes built transmissions:
How do you guys set up your tuning? I have the torque converter stuff setup just fine, I was instructed by the...
I am playing around with stuff still, I just zeroed out the lambda adders / subtractor tables base and base mbt. I am adding in the timing to the borderline spark tables. I tried a flash with the...
If you want to make the vct to do exactly what you want it to while floored, yes. But then again, I am sure it is close to optimized the way it runs now. Lol
I have a tune written for optimum power, but have not flashed it in and tried it yet, all of the speed density tables are blank so I am not sure what to put in them. I did a pull and went back...
No, I am saying that the car used to "self advance" the timing, it would have negative values in the knock retard, but since I have been tuning on the thing, its always just zeroes. I know it pulls...
That looks like you're nearly WOT, and at 22* spark! My throttle pegs at 76.5 degrees at wide open throttle and pinches on the shifts only.
May I ask what you did to the tables you identified in...
Yes it sure does.
65647
65622
I added to all of the tables in green to achieve my desired timing For my Methanol injection
Have you moved your Preignition Limit and cylinder pressure limit spark tables up out of the way, 63.5 in all the cells?
Thank you for doing this
I got her figured out, thanks
Mopar Stage 1 Attached
You can see the throttle pulls back 50 percent by 5800 rpm
that makes sense to me^^^^^
Yes, all of those values have already been maxed out on our end tuning wise.
Subscribing, We have played around with a whole lot of settings on these things and Still have throttle pull issues and random enrichment issues. I was thinking that there are some tables that we...
57269
Try using the settings in this tune file to see if it alleviates the issues with the fueling.
They are not in there
I finally stumbled across an Ecoboost Thread! I have been trying to grasp the whole logic ford uses on these things and have just started piddling around with a 2013 locally. There is alotttt to...
He will not be pleased, lol. they are not tuning out well at all though. Lol
I have a customer that we are trying to do some tuning for with a set of Smartfire 60# injectors installed and cannot seem to get them to idle / tip in correctly, we have tried many different...
Having the humps added in would seem to add in more mid range torque and get the turbo to light off harder I would think???
That would explain why it does not feel faster with them flattened out,...
I got to do some major logging tonight using the beta scanner and look forward to enabling the optimum power settings and dialing in cam timing in the near future.