Search:

Short answer is no. Break out the calculator. Start crunching numbers. Make it fit.

Biggest problem is it's overly rich and it never goes into closed loop. You have every single O2 code set to no error reported.

There's weird dips in the spark tables. Dips you'll transition...

If you had the trans built locally I'd take it by the builder's shop and let them drive it.

What converter is in it?

That or disconnected. Need a data log, or check codes, something more than year old logs showing it running.

Logs from a year ago when it was running mean nothing at this point. Have you scanned it? What are the codes? Have you called Brent about it?

Scrolling through the log in this post everything looks normal. I just scrolled through quickly looking at the O2s and trims so could have missed something else.

Rear main seals rarely leak. It's...

That's the kind of information we need to be able to help. I don't care how old you are you need to be able to put together an intelligent post so people know what's going on.

Do you have a data...

How about constructing an actual paragraph of what's going on, the work you did, etc. Enough of this one-line BS. Communicate like you have some level of education.

FFS there needs to be some sort of competency exam to pass before you're allowed to buy this tuning package.

The fuel smell is from a cam with overlap. If you take the cats off a bone stock LS car it'll stink pretty good. Put a cam in with some overlap and it really stinks up the joint. You understand what...

If you're hearing audible knock under light load I would start by doing an induction service on the vehicle to get it de-carboned. Might want to try high octane fuel if you're not already running it....

I just looked through a half dozen GEN3 OE files including a couple of the same OS and that code is set to no error reported in all of them.

This is right off the repository.

145504

Where's the tune file????

Can you be more specific? How far are they from the cylinder head? Can you put them closer to the manifolds?

Posts like this are just ridiculous. I mean c'mon man. No explanation of what you're working on, modifications, etc.

How about posting an actual data log instead of a picture of one???

145499

I'm not understanding why we don't start with the obvious first? VVE is still not straightened out and it's in speed density. No wonder it has a tip in stumble.

I went back and read your initial...

The O2s and the trims both are incredibly slow. What's the exhaust setup on it? Headers, manifolds, etc. and how far are the O2 sensors from the cylinder head?

I don't see anything abbie normal in any of the data logs. Do you have a log capturing the event you're talking about? The "Bank 1 goes crazy lean"?

Cool lookin wagon.

Has a data log of the event been posted? Time stamp?

You shouldn't have to convince him of anything. It's up to him to diagnose and repair it. That's part of being a tuner. If he's throwing his hands up and walking away, so should you.

Biggest...

This. Precisely.

Sounds like you need to pay someone who knows what they're doing. I can be contacted directly through the email in my sig.

I email tune everyday. If you're interested you can contact me through the email in my sig.