Search:

Type: Posts; User: MrComment

Search: Search took 0.00 seconds.

  1. To anyone reading this that might care about...

    To anyone reading this that might care about enabling the Alcohol Content sensor on the Volt.

    The magic trick was swapping all of the default Gas Torque Management tables into the E85 tables....
  2. Honestly after taking a long break from trying...

    Honestly after taking a long break from trying any tuning at all. I just sort of got talked into tuning this thing again.

    Laz is really the mpg guru when it comes to mileage, I believe he's...
  3. Virtual Torque Coefficients Editor for E78?

    My assumption is that the Torque coefficient values require some sort of modeling tool similar to the Virtual Volumetric Efficiency Editor in HPTuners?

    I'm looking for any tools or formulas in...
  4. Agreed, last week I swapped back to the stock...

    Agreed, last week I swapped back to the stock volt injectors.

    It might also be worth pointing out on in this thread we did finally figure out how to enable the sensor to utilize the ECUs flex fuel...
  5. Mileage Results etc...

    Based on the mostly Gasoline data I have collected over the last couple of months I decided it was time to start compiling my paper notes into an excel spreadsheet, this way I can see how big of a...
  6. Running on E60 now, will be up to E70 on the next fillup.

    After a few days of running around on E60 I'm pretty confident that the "visible" values given in the stock Volt tune file are legitimate numbers for E85.

    Adjusting all of the GAS table values...
  7. Installed location of the sensor.

    The sensor was installed as close as I could get to the fuel rail.

    The initial values used were 0.1L for the delay and transition but its obviously even less than this.

    For now Ive decided to...
  8. Next test, Fuel Injector Swap.

    47347

    Assuming I can ever figure out the previous issue.

    In the meantime I'm going to swap out my stock Volt injectors with the stock Cruze injectors. Hopefully this should be a copy and paste...
  9. Sensor installed but wont stay running with Sensor enabled.

    Using beta 2.25.1096, as only the most recent few releases support my application.

    1. The car still has the same pump gas in it with all of my testing. When I flash back to the stock tune the...
  10. Replies
    1
    Views
    1,799

    2012 Chevy Volt, Security Access Denied.

    46951

    2012 Chevy Volt, Read Error Message during Requesting Access phase.

    Using software version that came on the CD with the cable. 2.24.649 (edit: confirmed same behavior on 2.24.852 as well)...
  11. Perfect thanks for the screenshots Cruze, that's...

    Perfect thanks for the screenshots Cruze, that's exactly what I needed to see.
  12. E85 currently is 35% cheaper than 91+ in my area,...

    E85 currently is 35% cheaper than 91+ in my area, so this should save me about 15% at the pump.

    Plus it is one just one small step closer to running my own E100 (moonshine). Perfect for when the...
  13. E85 FlexFuel Conversion, 2012 Chevy Volt, 2012 Cruze Eco

    Right now I'm trying to decide between EFILive and HP Tuners.

    Specifically, to do this conversion below on my 2012 Chevy Volt/s.
    ...
Results 1 to 13 of 13