Hey guys been researching this and i found a few old threads on this rev matching for the 6L80E on down shifts with the tapp shift.
Does anyone know if anyone has done this ?
2010 sierra BTW
Type: Posts; User: jdmcrx
Hey guys been researching this and i found a few old threads on this rev matching for the 6L80E on down shifts with the tapp shift.
Does anyone know if anyone has done this ?
2010 sierra BTW
looks like we will be attempting to do the same objective . More info on this ?
thanks for the response, what did you do to your fuel system ?
i would like to put in my LC9 with BTR cam and maybe 10-12psi but want to figure out the fueling before i do this.
i was thinking...
yes the truck is a flexfuel setup and everything i read online was there good for around 600hp could be wrong i dont think im making 500hp yet lol
my issue is i put in a slighly bigger pulley and...
hey guys been trying to search this answer
2010 sierra 4.8 with TVS 2300 blower and 56lb injectors flexfuel pump at 7psi and im running out of fuel .
Options are
Replace fuel line with...
awesome thanks i will look into VVE tuning :) really appreciate it not alot of tuners within 5 hours of here .
thanks again :)
Hey guys 4.8 in a 2010 RCLB with a edelbrock SC its a tvs2300 and i have all the sonnax parts minus clutches and was wondering if anyone with experience could take a glance at my tune and give me any...
hey guys i have the edelbrock SC kit on my 2010 Sierrea and i see that HPTUNERS has a intercooler fitted option whats this do exactly?
I have a MPVI2 and my buddy is upgrading to a 3 so i want to buy his 2+ can i transfer my credits to the 2+?
Thanks I wonder if I ground 16 to 41 it would work or do I need to pulse the signal ?
Hey guys I want to keep the normal and pattern a shift points as I tow but would like to do a table for performance oriented shift points for the pattern b table I believe this is 4wd !
Is there a...
Thanks I will do this !
Can someone direct me to how the computer switches ?
I was told by a tuner that the high octane table is used at first but if the ecu sees knock it will switch to the low octane and be kind of...
Hey guys I have a 2010 4.8 Silverado with long tubes and tru dual 3? exhaust with intake and would just like some more power and cleaned up afr . I?ve played with it but it?s over my head from the...
This is just what i thought i was just worried that the ECU required canbus/body controller to make it run ?
Curious guys is it possible to swap in a VVT ecu into a non canbus chassis and keep the VVT ?
Looking to swap in a LY6 into my 1986 RV and keep VVT if possible
Hey guys been doing alot of research on this engine we are swapping into our winnebago.
So the motor is out of a 1998 chev 3500 454 vortec with a 4l80
My question is to swap the 0411 ecu along...
Im doing the same kind of build on my 454 winnebago.
i see you had to make a reluctor plate for the balancer, were you able to use the cam reluctor or did you use something in the distributor...
Curious I?m looking at putting in a 8.1 setup with the Alison 5spd into my parents RV to replace the carb 454 and th400!
Curious if the hp tunner can do everything I can do on a LS motor ?
I want to do a install on my 250 Chevy inline 6
I want individual fuel injectors and individual coil packs.
Would i be better to do the 4.3 or the 5.3 wiring harness and ecu ?
Hey guys not sure if this is the place . I dont do tunning no more as i dont have the time.
I have customers with the HHR SS and the COBALT SS and they are looking for email tunes as the nearest...
Have a customer with a 01 GT with IHE and would like a email tune. If anyone can recommend something let me know .
Installed 2.24 and now when i go to the VCM icon it ask me to repair modify or remove. i have the latest framework updated. I try to do VCM scanner and i get CLR error 80004005 ?
Anyone?
Hey guys looking for a LQ9 tune for my buddies escalade has the basic bolt ons for now. Intake Headers and exhaust. Is looking for a slight tune to run on 87 octane. Anyone have one i could try and...
Hey guys new to HPtuners
I downloaded vcm suite 2.24 and i have the frameworks downloaded. When i click on vcm or the scanner i keep getting
CLR error: 80004005
the program will now terminate...