I have had several communications with Hahn. They are very cordial and informative, but did not have a turbo to sell me. With regard to the intake, I purchased the hahn intake because it allowed...
Type: Posts; User: bajalobster
I have had several communications with Hahn. They are very cordial and informative, but did not have a turbo to sell me. With regard to the intake, I purchased the hahn intake because it allowed...
all junkyard custom crap, 2bar map, regular fuel tables, maf tables and now ve tables but at 2 bar.
There is more info in the middle of this thread, but this is an offroad application so may not...
On another note, my idle cleaned up quite a bit when I was able to manipulate the VE equations. Bottom line is we were at a disadvantage while trying to tune this motor with the e67 without the...
It's an amazing utility. My le5 is currently boosted using maf for upper end fueling. I used this utility to setup a 2 bar pe table and the utility converts it to usable equations for the e67. I'm...
The car is running "well". I still get intermittent codes po102 and po121 while driving. I have read elsewhere that they can be connected and if vacuum leak is not evident and shorting or lack of...
Yes, I significantly increased all 4 tables associated with the code. I have not fully tested as I have a new clutch now and trying to "break it in". Also, I suspect some grounding issue or...
12 to 14 psi...seems to hold pretty well.
Researching codes that were thrown...It appears that there may be a limp mode associated with po068 when flowing too much air or MAP (like when you hack a new turbo to a n/a motor??). Playing with...
I took the car out on the freeway today - came down the ramp in 3rd gear, leveled out with traffic at about 60mph, found my opening, punched it and blew the computer out...
limped to the side of...
Harness is professional built. Interestingly enough I did find a potential "short" chaffed wire to the Exhaust Camshaft Solenoid Sensor. I fixed it but have no reason to believe that was the root...
I have not altered the throttle tables. Also, just checked them against a stock tune in the repository for a 2007 chevy cobalt ss 2.4. My "zero" point is about 22 on the TPS and WOT is 88.
...
Hi, I would like to clarify that I have no background in tuning, but have been playing with my LE5 for some time with HPTuners.
This is an offroad car (that I mostly drive on the road) with most...
Thank you for your help. I am still waiting on hptuners, but will definitely look at this.
Thank you inspiring words. I have been looking through the file that you posted and am becoming more familiar with hptuners. Can you provide the stock file for the 2008 Le5 as well and also is...
Yes, thank you. This is exactly what I imagine will have to be done.
As far as having seen it work. I have seen it work well as Steve Humphrey does just this. The problem is this particular one...
Thank you very much. It sounds simple and why shouldn't it be.
Do you know why some others that I have tried to contract this out to would tell me that there are many specific E37 or E67 units...
Hi, I apologize if this is in the wrong place, but I have spent countless hours researching the mess that I am in with no tangible results.
I have a custom baja bug with a standalone stock Ecotec...
Ok yes, thank you.
I must reiterate that my harness and controller is E37 -the 2007 HHR 2.4 still used the E67 PCM. I am looking for what I fear is a bit out of the box solution.
Basically...
Hi, Thank you. I have downloaded the file, and I assume it is time to order hptuners suite and learn how to do this myself? Am I also correct in assuming that this stock HHR is applicable to the...
As an updated thought. I believe I can take a E37 from a 2008 2.4 ecotec such as the G6, chevy HHR, etc. Use hptuners to remove VATS, transmission codes and run my motor? I am concerned that there...
Yes LE5 2.4 from 2007 pontiac G6
Original Donor Vehicle VIN# 1G2ZF58B374101078
Hi,
I have recently purchased a standalone wiring harness and E37 PCM from Steve Humphrey of Costa Mesa, CA. As far as I am aware the E37 is supposed to be stock with VATS and maybe some other...