Cylinder airmass and Aircharge are measuring the same. I also tried making some changes to the driver demand settings to see if it would have any impact on the issue, it did not affect problem at all.
Type: Posts; User: 2500HD8.1
Cylinder airmass and Aircharge are measuring the same. I also tried making some changes to the driver demand settings to see if it would have any impact on the issue, it did not affect problem at all.
When I set up channels I had labeled Cyl Airmass as Aircharge, which I now see was wrong. Added Aircharge. Thanks for all your help.
Log with convertor off.
Turning off converter in first gear made no difference. Stays in 2WD also. The hunt continues.
Thanks for the reply. Didn't even see that the convertor was coming in. That's why it's a good idea to have multiple eyes check over things. I have disabled convertor and added AWD pids. Will give it...
Added log file to original post.
Car is a 2013 Charger 3.6, 8 speed AWD. Was wondering if anyone might have a suggestion on what could be causing a dip in airflow, fuel, and torque, around 3400 RPM, always at same spot during WOT...
Thanks for the reply. I will give that one a try.
Thanks for the reply. Those are the tables that I have been adjusting. I can get it to have what some call the "light switch" effect on light to moderate throttle, but as soon as I snap the throttle...
Car is a 2013 SXT AWD 3.6l 8 speed. I know this subject has been beat to death, but I have searched here and many other sites trying to figure out this throttle lag that plagues so many cars. I can,...
This appears to have done it. Changed table 45 to what I wanted and it now does what is requested. Still not sure why Shift ID was showing 44, I did double check mapping and 44 was not mapped to 45....
I had thought about remapping the offending table but, since no matter how much I changed it it had no affect on how it shifted, so I figured remapping it wouldn't change shift points either. It...
In order to get the Alcohol Content to read properly do you have to start with E0 gas and get trims tuned to no ethanol first? I have a 2013 Charger SXT that is factory FF and have been trying to get...
Thanks for the reply. I don't have Aggression Mapping available. My main issue is when just driving normally, table 43, and I start accelerating up a hill, the Accel Factor will start to increase and...
Been trying to adjust shift points on 2013 Charger SXT ZF8 transmission and the Accel Factor is giving me fits. I have adjusted the shift points in the specified shift table for the Accel Factor that...
Has anyone got Bluetooth to work properly using Trackaddict or TDN with an MPVI2+? I am using a Samsung Galaxy S20 and I am unable to get it to pair. Phone will see MPVI and start to pair, then it...
I have upgraded from MPVI2 Pro to MPVI2+ Pro and when I go to the VCM Suite it still shows only the MPVI2 with the S/N for the new MPVI2+. I am running Suite 4.10.5. All of my credits were...
Thank you.
I am the OP, were you able to find out about my ticket, #246629?
#246629
Trying to find out the status of a ticket I submitted on Oct 30. I have sent a couple of emails trying to find out the status of my ticket, but have not heard back. How do I find out the status of...
OK, thanks for the help. I'll submit a ticket.
Yes, if I understand correctly this should show me which table is being used to shift at that time.
I have a 2013 Charger SXT AWD with the ZF8HP transmission and wanted to try and do some transmission tuning. I have read the sticky on Getting To Know Your ZF TCM and have a better idea of tuning...
I have not used a Predator, but it could be their setting for the ETC TPS Max vs. RPM vs. % Max Available Torque table. I have a 2002 2500HD with 8.1 and if I set this table too high it will cause...