Powerboost file attached...
133934
Type: Posts; User: tramotorsports
Powerboost file attached...
133934
do the throttle relearn. It won't work with just one click though. you have to click the button over and over again about 30 times for it to actually work. Good Luck!
Has anyone had issues on the C7 platform getting WOT lockup with their torque converter. Works flawlessly everywhere except at WOT.
Circle D 258mm Pro Series currently installed. Switch from a...
same issue. bump.
Im having same issue on two turbo cars currently. This ?transfer case? limit never presented itself until recently. I can?t seem to get around it at the moment. When active it pulls 4-5* of timing...
Bump. No luck on gen 1 control pack ECU either
https://www.diyautotune.com/product/99-04-v8-mustang-gt/
This fixed all the tuning problems I was having.
I've attached a datalog with the issue I am having along with associated tune files...
9321993220
You can see STFT's are at +40-50% immediately after startup for about a minute straight. Full...
93213
Tune file attached. Proceed with caution it is a problem child.
Mods:
Built engine with cams
Procharged
ID1050's
Fore twin 465 return system
I'm having same issues with no luck. About to throw in the towel on this.
This has been the fix for me.
Has anyone dabbled in this yet? We have a Coyote Fox swap coming to a close equipped with a PBH 4R200. Hoping we will be able to get this dialed in properly ourselves. If anyone wants to assist or...
I?ve got one running a flex tune now. We are currently doing HPFP, injectors, lift pump, and BAP as we speak. We limited out our fuel sustem quite easily going to E. Hope this alleviates it.
It is commanding leaner because your fuel trims are negative. it is commanding a leaner value simply to maintain your target EQ ratio. These cars stay in closed loop at WOT so the indicated command...
Any ETA on this? Would really like to give it a shot on a 2018 Raptor.
I'm in the same boat. Can't seem to get it working properly.
Anyone have luck using this calculator on 15+ Ecoboost vehicles? Every time I calculate coefficients I'm getting some crazy numbers automatically popping up where I've already made changes...
Not sure if its like the other Chrysler PCM's but if so, set the engine displacement to 0. I think its under Engine-->General tab.
Assuming you weren't able to read the file?
I sometimes use his spreadsheet as a starting point if I'm building a new base. All other changes come from driving the vehicle and actually feeling it. Leaving converter unlocked in the lower gears...
Agreed. Should work through the scanners functions
Agreed, I try getting my customers into a converter and gear swap before any other modifications.
Why did he do that? Why not leave the stock tune in and just properly tune the car for the new parts?
I was right under $40k for an MD-250 at the end of 2016. Almost pulled the trigger before I found a slightly used one for almost half that price. I tune around 4 cars per week and haven't had a...
And make sure the EVAP solenoid valve is still installed. Had a car come in for dyno the other day that the valve was simply omitted and the EVAP line hooked directly to the intake manifold. massive...