08 Uplander 3.9L VATS issue
To disable there are patch 1 and patch 2. I thought if one is good two are better so I chose both customer comes to get the car and the alarm is going off lights...
Type: Posts; User: sreve
08 Uplander 3.9L VATS issue
To disable there are patch 1 and patch 2. I thought if one is good two are better so I chose both customer comes to get the car and the alarm is going off lights...
That looks like midnight madness @ gateway?
Ranken has tuning courses?
Anyone have an idea to solve a ABS issue with aftermarket wheels?
--------------------------------------------------------------------------------
Put the same height tires on all four or forget...
IDK about all that, of the tools I have HPT is pretty far down the list as far as what I would use for diagnosing trouble codes.
When will there ever be freeze frame & mode 6 data?
find a scanner that supports mode 6
I wonder why they would ever think of that?
Quote: or is there something else that needs to be done?
make sure that under system> a\c> recirculation set to fan 2
you can copy all the settings off a F-body cal
Are you using LS1 knock sensors?
They are the same and interchange with no problems
If you know someone with DHP or TunerCats they can save a bin
CVN calibration verification number.
I read the TSB the picture you had came from and it leads me to belive
you will be fine it the cvn matches up. They may still be able to find it if
they look...
The screen shot from the Tech 2 you posted has the operating system #
at the top followed by the calibration module id #s at the right are the cvn
which are check sums if every thing is as the...
I'm curious about mileage also.
CVN on the OS is correct
System should be 960E
Diagnostics 4C87
Engine Operation 6B64
Speedo 3948
It will be obvious it has been altered.
You need to put a...
I have this problem also serial starts with 1120824
is this one affected also?
never mind just saw this:HP Support (Bill) also said that he has seen this issues effects serial numbers that start...
Here you go
an almost file, system cal is one digit off all the rest the same
.cal fomat see pic can't post it here pm me if you want it
pink should be hot koeo
inj fuses 15a
They do not look out of line. There are major differnces @ 4-5v
but if system voltage is that low the car won't be running anyway.
why not log cylinder misfire 1-8
1.) V1 and V2 are EFI Live interfaces
2.) & 3.) All info is from EFIs site I would belive it to be accurate
BCC = Broad cast code identifies the the calibration , at the begining of computer
controled GM chip cars this was the only real way to indentify a calibration. They still
code it in to some and...
Here ya go
Those are the timing numbers for max torque. Pretty handy for making advanced high octane tables they may or may not be on the verge of KR.
Makes a real good starting point.
Quote: Did I justs find the issue? the two wires are fused some where?
maybe......maybe not
If you have traction control all three wires are spliced to the ASM . unplug the module.
I have been working on this Lambda err Maf & Ve config I am pretty
close i think, when i connect i get unsupported parameter on Lambda_err
and Commanded Lambda then it does not show in user...