Search:

Type: Posts; User: smitty@sts808

Search: Search took 0.00 seconds.

  1. Replies
    13
    Views
    12,190

    Be interested in seeing how you fix yours. My...

    Be interested in seeing how you fix yours. My 2800 stall is doing the same thing after lockup. I put a Dacco in mine so that may be my problem.
  2. For testing purposes I maxed all the misfire...

    For testing purposes I maxed all the misfire tables out and that cleared up that issue. Once the GT2-3 cam goes in I will try to tune the tables back in.
  3. So it has been confirmed that the wrong input...

    So it has been confirmed that the wrong input shaft is in trans. Newer 4L60e's need the shaft with reluctor wheel. Pulling trans back out and going back into it.
  4. After more research im thinking the wrong input...

    After more research im thinking the wrong input shaft was put in trans. The new pump housings have the iss installed into them and are vin code specific. The input shaft should also be specific but...
  5. figured I should learn how to log so here are two...

    figured I should learn how to log so here are two logs. First is just running out to an open area. second is stalling and launching at 69% throttle. Painted 11's with 26" wheels on a 5800 lb truck...
  6. Last dyno was 417 whp 442 tq just in case any...

    Last dyno was 417 whp 442 tq just in case any ones interested in what it does for power.
  7. p0717 after 2800 stall install 2011 silverado 4l60e

    Hey guys I am throwing a P0717 and the p0300 misfire after installing a built 4l60e with 2800 stall. Truck is a 4.8 lysholm supercharged 3:73 gears

    I did a few runs and when i first start out the...
  8. Replies
    8
    Views
    4,488

    AH thanks for checking it out. I see your from...

    AH thanks for checking it out. I see your from Houston. All the air suspension for the truck came from Ekstensive Metal Works in Houston.
  9. Replies
    8
    Views
    4,488

    Here's the stock config file Recap for search...

    Here's the stock config file

    Recap for search function 2011 SIlverado LS 4.8 Automatic
  10. Replies
    8
    Views
    4,488

    Thanks Bill will do. That explains why I...

    Thanks Bill will do. That explains why I couldn't run scanner on .147 I had two separate laptops set up so I could run editor and scanner. :banghead:

    I will post up the file for the truck...
  11. Replies
    8
    Views
    4,488

    2011 Silverado 4.8 SC

    Ok guys I'm fresh on the HPtuner and wanted to get some advice on how to proceed on this build.

    2011 Silverado 4.8
    Lysholm Twin Screw SC 8.5 lb pulley
    55 lb injectors
    Relocated IAT to Manifold...
Results 1 to 11 of 11