Search:

I have wondered about this data here and how to extrapolate it to match what is in HP Tuners and also how accurate it is. The original Formatted Link is here:...

It typically takes 27 seconds to flash the VCM for a 99 model Z-28. The other models may have different size calibration files or the baud rate is set very low in the windows control panel for it to...

I have been wondering since we are now getting the Pro edition of the software (since we can re-write the OS) is it possible to re-flash a 99-00 VCM to a 2002 model to gain the resolution that the...

I am just checking to see if you have adjusted any of your misfire tables. If so you might want to set them back to stock if you haven't already.

I would first pull the plugs to see if their is any visible damage and ensure that your wires are snapped back on good.
I would then check the misfire counters to see if you can locate the bad...

http://www.efi101.com/

When the WB is connected to your HP Tuners cable it will add a couple of fields in the Table Display. Once you see this you may need right click and press Load Defaults. Once you do you should be...

Peter @ TechEdge is like HP Tuners as far as Tech Support is concerned. He is either devleloping/testing or answering emails. He does generally answer questions within at most a day unless he is...

It "might" be possible for them to be that different but most likely they use a different formula to derive @ the VE values listed in the VE table. I would check with Keith or Ken as they know the...

With HP Tuners you will be able to view the info as well in real-time just like Autotap. You will also be able to Log the data to be reviewed later in excel or within the VCMScanner software.

So,...

What is really sad is to see what is changed with the "Power" tunes from the Hypertech's that they sell for several hundred dollars. It is funny to see people on forums who do not understand this and...

Mine was just about one week from the time they received it. I sent it in on a Wed, and I received a notification the next week that it was shipping out. I assume they just ship them out in batches...

I think you would have been better off with a LM-1 for your application since it is more suited for push button/stand alone style logging. I use a TechEdge setup as well but it is their 2B0 which...

I would re-download and if that doesn't correct it they may need to rebuild your install for you.

I believe GM did away with the secondary VE Table in the later years of the F-Bodies (01 or 02)? Now they use the primary table as that is all there is for both (Speed Density or MAF mode)

The Secondary is used as a fallback when your VCM is in Speed Density mode. The Primary is what you use to tune when you have a normal MAF setup.

199.00 for each additional up to 4 then it is 399.00 ea.

You guys ROCK!

You do know that you are going to "Delete" any competition with this new pricing structure. ;D

How does this affect existing users who paid for the Standard edition + the Upgraded EIO unit?

Do we get the option of the "PRO Series" and adding another vehicle type?

The 94-95 LT1's use an Intel AN28F512 Flash chip. (2 to be exact) 1 is generally referred to as the T side and the other the E side. If you are wanting to program your PCM the most inexpensive method...

There is also another product that is coming out very soon that has tremendous potential. I have spoken with the creator of it many times over the last few months and the problem is this.

How do...

You can generally overwrite the existing tune but he messes with the checksums and most tuning software will not touch it as it is too risky. The checksums are your only method to ensure you are...

I got this info out of their documentation so it appears to be correct.

10.00 0.00
10.25 0.13
10.00 0.25
10.75 0.38
11.00 0.50
11.25 0.63
11.50 0.75
11.75 0.88

Hey Jim, you can just let them send the pigtails to me ;D

What were the results of the AFR = (V/.5)+10. formula?