Search:

lol
I have to TC, i'm Gen III, MN6... but expect a good eval of the torque... sad to read this

Old post, but always usefull...
What HPT delivred torque give as accurate information when we rape PE ? (as i'm +15psi FI and have 1bar MAP... and also, i max the Hz as soon as 4000)
Does the HPT...

Thanks... it's clear now

This weekend, i changed Platform (and Platform option according to the Platform i m from), and have a no start condition (as i have not enouth battery), and same boat with no VATS
Change VIN to...

Did it, and have a no start condition (as i have not enouth battery), and same boat with no VATS
Change VIN to according plateform, and HPT ask for licence, so, i stop
Do i need another licening ?...

Hi,

Here is the tune and the log
All test was in "5 - race mode", so TC in automaticaly disabled

Yesderday, i done a long cruise and wot log, same story... exactly 640ft-lb limited (on HPT...

Hi,

On a heavy modded ZL1, i hit the 640 lb ft limit (timing is defaulting to 9-12 degrees, approx 10 less than commanded)

I have already maxout...
- Max Engine Torque vs RPM vs Gear
- Max...

I have test a ton of tune, no way to start with 2bar or 3bar OS, so, where is the real problem ???
- is the 2 or 3 bar OS dont take care some parameter (as the size of the engine - because i m...

Yes, it's a EFI source MAP sensor (and it's the good data, i have edited my previous post just before you anwser)

I can change injector data, but i use 1000 ID injector data with success and no...

I use this sensor : http://www.efisource.com/shop/ls1-style-3-bar-map-sensor/

I have do ZERO change on my tune for the MAP, cause 3 bar OS data is already good ("The Linear setting is 305 and the...

:-(
i have try with 2 bars OS ? (for now, dont need going more than 2 bars)

Not better with the last version on the day (3.6xxx)... and the 2 bars OS
Same story (crazy torque data), i just...

Better (engine try to start) but die immediatly

Also, i have 0103H and 1514HC DTC

I have keep engine alive 3sec when i put some press on the gaz pedal
I give you the V2tune and the log

Thanks, i try this right now

Hi,
On my tuned boosted C5 corvette with stock OS, i changed sensor for 3 bars (LS1 style), car ran well enough to going back home with.
now, i try to going 3 bars OS, but no start (and smelling...

Here is the cruise log (car dont have WB) 57584

Hey Guys,

My friend is having some issues with his quite new Camaro ZL1 quite stock (approx 13.000 miles, never touch, just a CAI)

He has KR (as much as 8 degrees) and BurstK (as much as +10...

So, what hardware ? what soft ?

Does an Hypertech Programmers works ?
Superchips ?

Or does i need something else (i.e Diablo sport and CMR tuner, but it work only for Dodge from 2003, so, it's...

Hi everybody
I know HTP not support this engine for now, but i need to know if my friend have a problem with his car or if it's normal !?
HTP is capable of scan, so, i done

+/-5 LTFT is...

1)
Basicaly a stock 2008 mustang
I want calc the IDC, but, impossible to log something who can help

My goal is to verify if E85 is possible on it without change injectors

I have log on hard...

A lots of good news, and just one who isnt.

I have test fuel pressure : no lost.
I have buy 1000cc injector, but not receive before the last drag race, so, simulate E30 (mix E85 and normal fuel)....

I will try to find a fuel gauge and test.

In fact, i was thinking that i have 60lbs injectors... but they are 60lbs Ã* 43.5psi, and LS1 use 58psi, so it's like 80lbs !

And using 80lbs injector on E85 is like 61lbs without E85

I know...

Think i need upgrade by install a boost a pump (as the Kenne Bell 20 Amp. BAP)?
Or upgrade by install FAST LS1 fuel rail set ?
Or other ?

My car :
stock 2000 LS1 FI - Vortech V3 Si Trim & 3.4" pulley - on E85
60 injectors
255lbs legenfilter fuel pump
Have change stocio from 14.7 to 10.06

Look at my number on drag strip - 1#...

Well, more of 80% for stock :eek:, so, no other solution... looking for bigger injector :mad: (perhaps the same as newer tahoe flex fuel).

Thanks