Hi,
I was using the old version from year 2013. I never had any problem.
With the current version I always get a traction failure and the radio can't be switched off anymore, and the reverse...
Type: Posts; User: MadMarx
Hi,
I was using the old version from year 2013. I never had any problem.
With the current version I always get a traction failure and the radio can't be switched off anymore, and the reverse...
It think you were right.
The ECT Area Scalar was no help with idle mixture. I've changed the first number on the MAF table to 10% higher value which has solved it.
Question:
With the stock number...
Thanks for reply.
I've tried to set the VE or MAF settings but this results in erratic idle and the engine don't take any throttle anymore.
I've experimented with the ETC Area Scalar (as this is...
Hi,
on idle, my I5 engine is running lean, the LTFT says.
If I change the ETC Area Scalar value, does it affect the mixture?
To make it richer about 20%, do I need to sett the ETC Area Scalar...
Hi,
I have on my Hummer H3 5 cylinder at able which has options:
Min Cam 0 degree
Low Cam 9 degree
Mid Cam 12 degree
High Cam 16 degree
Max Cam 25 degree
Hi,
the scanner tool has the VCM screen which allow to manipulate spark advance while the engine is running.
Questions:
- Why are the "absolute" and "plus" option disabled?
- If I set on the...
Can you tell me how to fix anything?
The software is in use as it came.
The connector seems to work fine too.
If I load the standard histograms I don't get anything usable.
Have a look...the...
And something interesting.
I changed at the AFR spark correction table the values to negative like -5 degree.
The result was, as soon the PE table got into action at full throttle the advance...
I took the given histogram patterns as basis but the problem was that got only one line in the table with numbers.
The y-axis was empty.
So I changed the y-axis to "Mass Air flow" sensor to fill...
Hi,
today I found out that I have some differences with the tables I set in Editor and the histogram table I get after a ride:
Spark table:...
I still have difficulties in setting up the histograms.
Any idea how to do that?
Hi,
is there a way to find out which sensors or PID are supported with the car?
All configurations I try to establish seem to be not supported.
What can I do?
38957
Strange thing.
Thanks for input.
I wasn't able to make it work with the Collie config but I could use the loggin data from the Collie config to my own config to show the values.
The funny thing...
I would like to know about this option.
After about 10 seconds of full throttle suddenly I do see a lot of spark retard and an enrichment which jumps up from 13 AF to 10.5 AF.
I suppose I do...
I don't have access to a wideband and can't change the exhaust to fit one.
Hi Hawk,
I'm using your Collie cfg file and had a look on the knock retard page and found values only on the first line?...
Hi,
I'm new to this kind of tuning.
I've already tuned the spark tables to give more advance to use 98RON, I adjusted and recalibrated the MAF tables based on the advice here and now, after I have...
I've corrected the MAF values.
Before:
https://lh5.googleusercontent.com/-Oi7zLKhHRHA/UXDs_mkr9lI/AAAAAAAABuY/t6SZsJBCSRU/s1046/histo+fuel.JPG
After:...
The first try outs:
http://www.youtube.com/watch?v=MRODEzC5GmY&feature=youtu.be
Not too bad for 3.5L and 2.2 tons
Well, managed to make histos.
This is 98RON fuel
https://lh5.googleusercontent.com/-Oi7zLKhHRHA/UXDs_mkr9lI/AAAAAAAABuY/t6SZsJBCSRU/s1046/histo+fuel.JPG
and LPG:...
Aha, it seems I did a mistake.
I have to save the log hpl file instead of the *hst file.
right?
I opened the histogram *.hst file. I right click on the cells but the "load data" option is disabled.
What did I wrong? Or can't my software version save datas?
I drove today and filled the histo with datas and I saved a file from the histo chart which gives a MAF- STFT.hst file.
Now I try to open it and I have no values anymore. The file size has 105...
Thanks a lot. I'll try.
I've ordered the book "Engine Management: Advanced Tuning"
Hope this getting me some input that I can ask better questions.
Hello,
I'm new to ECU tuning. Normally I tune with distributors and Weber carbs on vintage cars.
As here several times explained I tested with the scanner the MAF and made a histogram with...