Good morning here is what i have done for the return fuel system
under fuel system-fuel pump-desired voltage-(15.00) volts all cells. fuel system-feedback-P Gain,I Gain,D Gain set 0
under fuel...
Type: Posts; User: slyb28
Good morning here is what i have done for the return fuel system
under fuel system-fuel pump-desired voltage-(15.00) volts all cells. fuel system-feedback-P Gain,I Gain,D Gain set 0
under fuel...
Good afternoon decipha found the adaptive pump but not finding pump output table
Thanks for your help
Thank You
What do I need to change in my tune to run a return fuel system on 2004 mustang 4.6
Found the formula
Good morning so how do I go about entering the data manual
Need help entering FRPP LU47 lbs injector data
Thanks B
Is the 2012 Fusion 3,0 surported and if it is can it disable PATS
Thanks B
You have options if you are looking
https://lasotaracing.com
Is it a blow through or draw through
If blow through is the sensor away from bends that can cause turbulence with the sensor reading
Ok the eec v and hp tuners it’s all new to use and yes it’s does still have some bugs to be work out.
But with time we will get better with using the software and the software will keep revolving....
Yes it does
99-04 Mustang GT 4.6 (2) 2 N/A
00 Mustang Cobra R 5.4 (2) 2 N/A
01 Mustang Cobra 4.6 (2) 2 N/A
03-04 Mustang Cobra 4.6 (2) 2 N/A
03-04 Mustang Mach 1 4.6 (2) 2 N/A
01 Mustang Bullitt 4.6...
Turn off adaptive fueling
This shuts off long term fuel trims so you can see short term fuel trim without the pcm changing anything. If you leave on the pcm will be making changes trying to correct...
Yes Vortech supercharger
https://www.deatschwerks.com/files/dw/injector_tech/GM_Calibration_Data/GM%20injector%20data%2016u-65.xls
Post under GM for these injectors
Need a stock tune for 2004 Roush mustang 4.6 manual trans.
Do yourself a favor can your wideband log in lambda if so use lambda and update you vim suites to the latest beta
Good afternoon you will need to invest in a good wideband (I use zeitronix) reason it data log as well.
Up date your software beta 4.5.4 which should be The latest
Looking information on building a bench top harness for programming EEC V computers
Have anyone being successful in using HP Tuners with a MacBook Pro computer and if so how did you do it.
Thanks B
Good morning Caniggia should be getting abaco a/f meter this week also sct software for data logging the car owner also went ahead and order the upgrade intake manifold was just wondering at what...
I am changing the a/f meter but trying to also figure out whats wrong for reference in the future.
Does the turbonetics kits have this problems?
So Eric you are saying the placement of the sensor is more at fault than anything
Do u get the software with the meter and how user friendly is it