Search:

Scott, let me try and calrify as I probably didn't use the right words:

You are 100% correct, O2 sensors output a voltage based on lambda sensed.

Just like MAF and MAP sensors have a transfer...

Keep in mind the "loop" between the oxygen sensor and closed loop is based on the cross count voltage of the narrband O2, where the car "switches" from lean/rich/lean rich. Changing the stoich won't...

any update?

Also do you get a fuel pump prime at key on? 98s just want a 50% DC, 30 or 50hz frequency signal from the BCM to the ECU.

We used one of these (can't remember which) in a friends 3800 to RX7...

Start, then stall. You can always jumper the FP with 12V from the battery for testing.

Hi All,

I need a volunteer to do the following:

Disable codes for VVT, unplug the solenoid, test for normal operation.

Trying to determine if the PCM is going to react by going into a limp...

Hi,


I'm looking at swapping a 4200 from 07+ SUV that runs the 58x crank trigger and 4x cam reluctor. I was curious if the following could be performed:


VATS/Passkey/Theft Detterent...