Search:

Thanks for hanging in there with me on this 5FDP. I've been busy with family matters for a few days and just getting back to this.
To answer your questions, no the fuel pump is not on a switch. It...

I received the new computer to try and it did exactly the same thing - started right up, ran for 5 seconds, and slowly died. I'm open to trying anything at this point.

I have a new computer coming from the guy who modified my harness and did the original computer mods. I'll let you know what happens.

Here is the tune with fuel added to the MAF curve.
102660.

Here's a log with the added scan parameters suggested above.
102661

5FDP - Is the folder containing the sample file you mentioned on the CD I received when I bought the program? That was a few years ago but I think I can find it.
Also, where on the editor is the...

Per 5FDP's suggesion I turned on as many of the DTC's that I think have anything to do with my setup. This tune and scan reflect the changes. I didn't modify the fuel/MAF curve because I don't know...

Thanks for the response. Yes the fuel pressure stays steady at 58 the whole time.

I didn't do the tune so I don't know why fuel was removed from the MAF curve. Frankly I am not familiar enough...

Sorry I forgot to post the tune.

102625

I have a 2001 LS1 from a TransAM going into an old Plymouth. The ECU has been reprogrammed the usual way for stand alone applications. The VATS is off, rear O2 sensors disabled, etc. The log shows...

-I have entered the suggested values in both tables and will try it out tomorrow. Do I need to worry about the warning about incompatibility with the TAC module? If these values don't provide the...

I have a 6.0 LS in a 68 Cutless. The throttle is so responsive at low speed that it's hard to not chirp the tires at stop lights. How do I tone it down? Thanks.

Thank you gents. I upgraded to 3.6 and am now able to view everything normally.

my file is attached if I've done it correctly.

I scanned my vehicle file into my laptop. The scan was completed normally. But when I try to view the various parameters the screen is blank except for the word Transmission or Engine in the upper...