Hey bud I have a customer here with a 2015 6.2L 8 speed I have sent the info log to support 2x but Im not sure I can calibrate the transmission at this point if you can clear this up for me. The...
Type: Posts; User: wildman
Hey bud I have a customer here with a 2015 6.2L 8 speed I have sent the info log to support 2x but Im not sure I can calibrate the transmission at this point if you can clear this up for me. The...
I have been eyeing the desired throttle area tables for a while on the gen 3 and 4 platforms but i have always stayed away from them due to the disclaimer of the tac module calibration mis match...
Attn. New interfaces wont work with our saved copy of 2011 2.23
I will probably get stoned for this but if you order and new interface or Im assuming have your old one repaired your regen delete beta is a thing of the past. I just found out the hard way I...
Bump
MikeOD It looks like its just me and you but it was worth shot to bring it up. Thanks for your support!
Yes they have us in a tough spot we cant edit any bcm features without GM'S approaval even with tech 2 or MDI as you stated just dropping a bug in HP tuners ear I would love to see something like...
Guys Im asking you because I dont know anybody else to turn to. I need to be able to edit the BCM functions nothing real crazy. I have a very strong need to modify door locks on all late model gm...
Any word on this Bill I know you guys are busy but I have several d-maxs guys sweating me for a tune.
Detonation is your main concern or leaning out. words of wisdom keep the afr fat when starting out like 11.5
no comanded afr is not constant the vehicle will determine what the ethanol content of...
Yes Its confusing when you increase the desired boost tables to turn up the boost is what causes it but its only in the 16-1800 rpm cruise range. It only happens when you are at cruise speed low...
Email sent thanks
Guys some of the 08 duramax engines throw a p0299 code and go into reduced power mode after a tune requesting more boost. EFI live has a fix thought I would ask HP tuners to pick up the one table...
get the latest beta from support and relearn the idle position with the scanner this should solve the problem. you have to turn the key on engine off and hit the throttle relearn tab on the vcm...
I would like to know also if anybody does know?:shrug::shrug::shrug:
Smoke show you need to zero all your burst knock tables. They are under spark control> spark retard zero everything burst knock is not needed its simply the computer saying I think the engine may...