One other way could be is if enough people put tickets in, HPT may get it working.
Type: Posts; User: SlvrSky07
One other way could be is if enough people put tickets in, HPT may get it working.
I wish, from the HP tuner folks, its a dead topic. The only work around that would kinda be similar would be to use a frequency to voltage converter and put it in the HP tuners pro input and use the...
Thank you for your response!
Hello, I have a 2016 Silverado with a 5.3l. The engine is stock with stock injectors. Something I noticed while tuning is mostly when the ETC is under operating temp, while coasting the engine will...
If you are having a vac leak, you could try the ole brake cleaner trick to help you find the leak. Another way would be to fab up a boost leak tester, it would be just filling your piping/ intake...
Yes, I believe the place they were hosted at was taken down, I do not have backup photos but the description should help you.
https://www.skyroadster.com/threads/2-4l-turbo-pcv-mod-for-a-oil-catch-can-that-actually-works.37951/#post-525812
Never mind, I believe its fixed now. I made all the tables in Open loop/ Base equal to 1.0 except for EQ Ratio Min, where it ramps down from 1.623 to 1.0 at 133*. Before I had all tables at 1.0 from...
Attached is 2 logs. The first one is from cold startup until about 180 degree engine temp, the 2nd is after the car was restarted and idling.
Hello, I am having a weird issue when logging. I just noticed my EQ commanded never reaches the desired ratio from cold startup. To explain further, I have set my open loop air flow modifiers to 1.0...
I had a similar issue with my LE5 when I first installed a turbo. I found the PCV system was causing issues for me. I did a write up on skyroadster on how I did mine. Also the air intake temp sensor...
I know this is an old post but it was what I was wondering also about is the tuning procedure the same as non vvt engine.
I cant seem to find any information on what you would log or put in that ExhaustCam.IntakeCam table. What would be the difference between that table and the Constants table? I imagine that the...
Would you recommend a certain cam angle to lock in and use that as base? Or use 0 since that the lowest number ?
Also thanks for taking time to explain this to me. On all the VVE stuff I have...
Would you recommend changing the desired angle for the intake and exhaust cam (low-med-high baro) to 0, doing the "classic" SD tune to make sure the logged data is not skewed due to the cam angles...
Thanks for pointing me in the right direction. Hopefully I can get this understood and figured out before the car goes away for the winter lol.
smokeshow, I came across your post here: https://www.performancetrucks.net/forums/tuning-diagnostics-electronics-wiring-161/vvt-calibration-551391/
You mentioned '#3 If a MAF is installed and...
I was always told to log that way, but what you say makes sense. I guess I figured it it was kind of like a base map for them at 0 and it adjusted from there. I will have to look into that more.
Anyone??
Hello. I am trying to get the SD tune completed on my Saturn Sky. I have 80lb injectors with a fuel return system with 1:1 AFPR. I am running into an issue when I am going from VAC to Boost ONLY...
From all the research and install videos on other E67 ECMs they all show the top "blue" connector and pin 5. I have installed the pin correctly. I have verified its connection, when using a...
Can anyone confirm that is the correct Ecm pin?
I am still having issues with anything reading on the scanner for the flex fuel freq and ratio. I have loaded the beta, changed it to sensor enabled and sensor type sensor and did a write entire. It...
Thanks to Josh @ hptuners:
20220 - Flex Fuel Sensor
330 - Flex Fuel Sensor Diag
3144 - Flex Fuel Fail%
4140 - Flex Fuel Diag Delay
2424 - Power Enrichment Mode Threshold
2401 - Power...
Nope it’s an LE5 2.4l. I have researched a lot but not coming up with anything really besides V8s. I emailed support but haven’t heard back from them.