Hi, my mods are stroker, ported heads, and a camshaft and its reading almost 80 kpa at idle, the problem is that the LTFT adds fuel up to 25 then resets and goes -10 and keeps doing, I have closed...
Type: Posts; User: shamanizim
Hi, my mods are stroker, ported heads, and a camshaft and its reading almost 80 kpa at idle, the problem is that the LTFT adds fuel up to 25 then resets and goes -10 and keeps doing, I have closed...
well I have tried to do some changesto the file could you please use this file just copy everything over your file and then flash it, it should be ok.
you could try to lower your Idle RPM Limits -> Idle Speed Min than the target Idle RPM,
have you done some modification in the Electronic Throttle under the airflow tab if you done I would advise...
well my friend told me that some of those ecms after you upload a tune to it the ltft stops all you have to do is take the car for a drive and then turn it off then the ltft will work with you again...
well here is the scan files :)
the car has been tuned by another person and he did all of those things I am going to change those things, and I have downloaded a stock 2 files from the repository and I still the have issue with...
Hello guys,
I have tried to tune my friends 2011 camaro but I have faced a problem with the LTFT which is:
It wont start learning by it self I have to force it to work, and then when I do so it...
Hi recently I have tuned a camaro the car had a camshaft and a bigger bore the car still N/A, I had like two major problems:
1. when ever I do a test run the maf curve readings isnt smooth,...
Hi please bear up with me because this is my first time to tune :) I know my questions are noobish but I tried my best so far and it didn't work :(
I have installed a camshaft and heads to my car...
Hi I am getting the P0106 code, I have a L98 engine the thing is when I am start scanning the MAP sensor reading is always on 98 KPA no matter what is the TPS is, I am using after market heads,...
solved the problem, sorry for posting :S
Hi I am having a problem with getting live data from the car I think that I have put everything the way it should but I am getting the <unsupported parameter> issue for the predefined parameter (to...