Search:

just wondering if you ever got to the bottom of this, encountering the same issue

I'm definitely interested to hear your results once you put the throttle settings back to stock. I copied the driver demand tables from a 2018(I think, memories not what it used to be) into my...

In regards to the cats, not my truck, not my choice, Ill recommend it to the owner, but this is the path he chose...
So even if it stays catless, fit rear O2s?
And just so im totaly clear on the...

OK, so you are saying i need to set the throttle max area table back to stock? or the MAX % area table? I get it about the EPA stuff, just wasnt sure what everyone was doing for vehicles for off...

I Have updated the tables for the manifold and throttle body, along with the cam specs from btr. Mainly looking for info on the O2 sensor tables that need changing and how to turn off the cat warm...

Hi all,
Tuning a 2016 sierra 5.3, BTR stg 2 cam with 4 deg limiter, speed engineering long tube headers no cats, 6.2 factory intake and matching throttle body and AEM cold air intake. Rear o2s...

Maxing it worked, SD tune done ✔️ can't get the comanded and actual to match exactly the top end, but are close enough. Figure this is due to the lsa spray pattern as you mentioned. Tidy up the...

I believe I found the answer to my question, modify the p1514 error table in the diagram tab. X by 1.3.

OK, thanks for the input!
Ill switch it all to sd and re tune. how do i set it so i dont get p0068 p1514 engine power reduced fault?
Yes the fuel pressure is holding steady.

I have updated the inj data from the file supplied above, double checked the fuel pressure with vac hose disconected (58psi). Set high rpm disable to 150rpm, dcfo off cot off PE rpm delay to 8000 and...

Thank you!

Its running a boost refenced adustable fuel reg, set to psi. I copied the injector data from a CTS-V stock file. I think i see the issue with the inj data. The CTS has a returnless system...
How...

I have a C10 with a 6l swap that im trying to tune. It came to me after a few other guys had already 'Had a go'. needles to say the tune was all over the place. Ive been working through it slowly fix...