Here you go
Type: Posts; User: GT stang
Here you go
Yes.
they all share the same 12v power from that 40A fuse , if its not the fuse then its something along the harness (I would look for wires or connectors near exhaust first), also you can try...
https://www.hptuners.com/vehicles/ford-tuning/
it works like the actual vs commanded pedal
for example the actual pedal position is 80% but the commanded output is 100%
maybe you can only see changes in the scanner if you log the pedal...
You will need to enable whatever map points you want first
check your mapped point configuration and snap to point and work it from there
hello
I have problem with the mpvi ,
scanner was open before starting the car and connected
was trying to figure which plug for baro and map sensor reading the sensors voltage
then tried to...