I have a friend with 6.4 procharged in a charger and he had car tuned somewhere up north but since now it goes into limp mode. Didn't till the tuner gave it back. And I didn't know if the tune would...
Type: Posts; User: FlatTop
I have a friend with 6.4 procharged in a charger and he had car tuned somewhere up north but since now it goes into limp mode. Didn't till the tuner gave it back. And I didn't know if the tune would...
Dodge just said they cant flash it unless pcm is in the car. Not so easy lol. May send it to someone who can flash pcm. If anyone has that capability let me know.
Thanks Again
Thanks all. No I don't have the 6.1 harness. I have a 6.1 pcm and I popped my 6.1 stroker so I put the 5.7 back in with original 5.7 vvt pcm. It did nothing. I put the 6.1 pcm in just to see if it...
Ya man it is. And I cant say who and why either. But do I need a new pcm and start over or what. I'm Lost now. And I was learning so much. Till now anyway. I just need a direction. New pcm with my...
I couldn't find it But I have code P0339 code crankshaft sensor. Do we have a reluctor wheel size available in software ?
Reason I ask and its a mess and wont throw no shops under the bus but I...
I have bricked mine in the past. Tossed it aside and put another one in. Its true easy to brick if you don't
load it up right way. There are a couple vendors who I hear can fix them.
Flattop
What a great read. I learned a lot here guys that pertains to my combo. That I must say has come along very nice.
FlatTop
I am very familiar with Modern Muscle and spend thousands with them. Good shop.
Was told that a flash will work, however here I sit dead.
The map is from my Vorteck blower install and no visible...
Correct kmoney, I wont say who because I don't want to get a the shop or there tuner in any kind of hassle. It is a very well know shop and tuner that has made huge strides in the modern mopar...
I noticed and did see its a 5.7 pcm flashed to a 6.1 that was supposed to run the car. The data and tune is whats in the pcm now. I understand and know the difference in reluctor wheels are different...
Yes on the head grounds. I didn't get any codes on that sensor as I did when I forgot to plug it in. easy fix and ill be checking them all.
I spent all night researching circuits and pcm failures...
Thanks for the help. It is a 6.1 reluctor wheel and I knew that when I put it together. I was told by the
big hemi shops that my pcm could be flashed to work or a 6.1 pcm that I have already tried...
I have a mess. Wanting to go faster I pulled a perfectly running 5.7 VVT motor stroker 392 with Vortech Blower, cam stock 392 with a limiter, 4000 stall, built NAG1 trans, and supporting mods that...
That is correct, you need to do a relearn on the trans. There is a procedure for the NAG 1 trans. It requires starting and driving xxx mph and down shift coming to stop then up shifting up to xxx mph...
I have the pro suite for Dodge now. I need the added 2 bar enhancements. Cannot figure out how to get the product. Any help would be great.
Thanks FT
I have read every dodge thread there is, as I just purchased the pro suite for 09 RT Challenger. Hope I wasn't to early in spending my money with a bunch of stuff that's not supported and don't work....
Did you get your answers Vortech ?
I also have an 09 RT with a vortech V 3 and I stroked my 5.7 RT Auto. Im watching how the tuning pulls together.
Presently Im on Diablo and never had choices...
On an RT 09 challenger to turn it off, Get mph up to say 10mph and take key and turn it like you were going to start the car and hold it there.
It will chime and show disabled on the dash. As far...
When I did my stroker and cam, as I needed the limiter I had to have the table sent to my tuner for the phaser. There was none
back then. Someone will have to put it together.
FlatTop
There a big need need for trans tuning for the LC LX 08 and up platform. Just to change rear end gear, Tire size,dia. Then its to shift point adjustment and rev limiter, needs to go to 6600 at the...
The word is out for sure. It poped up on our board ChallengerTalk/Forum Also noting that HP tuners has tuned a Hellcat using the Beta software is what was said.
Also as a note of another claim Aj...
I been seeing some buzz about all this. Interesting.
FlatTop
Theres more 08 to 2012 that need tuning than the newer 14s and 15s. I know everybody wants there tuning support, I understand. Just seems more older that are willing to
jump in and mod. Myself in...
Just joined the forum as I have been watching the Challenger tuning. I have been using DS cmr tuning. And not happy as theres is set up for shops to make money and not for single user. At 4k for the...