Search:

Question for you, does the LS computer have a internal program that will shut off the injectors on start up other than the VAT system?

thank you

no change, same thing starts a couple of times then, just cranks no start......

MAF is off to the left side of the motor, all the same size pipe straight in and out curves just before the TB. the pipe is 3.5 inch
I did run thru your other post with the mpvi all seemed in line,...

Also I have a mechanical pressure tester right on the rail, the voltage at the injector is 12 volts.... and the lite tester blinks nice and bright

its a little diode lite tester that plugs into the power and ground wire on the harness, its fits right into the harness where the harness would plug into the injector. Its strange that it only...

thanks i will try that

also here is a copy of my tune

144572

Hi - I'm new to HP tuners and have a problem I hope you can help me with.

I have a 1970 Camaro that I have rebuilt from the ground up. I put an LS1 motor out of a 2004 Corvette into the car with...

I will try to figure out how to post it on the GM section, Thanks

I did go thru what Fuse suggested, here is what I found:
Timing is on looking at the tune
It will start and run with Starting...

thanks for the feed back I will go thru these items. I have done some of them but I will go thru it again, make sure I have not missed anything.
Will let ya know

I bought a new battery for the Camaro. I was thinking that it might be a low voltage problem. I put the new battery in the car, started 6 times in a row. I then let the car sit for about 20 min....

sorry it took so long, I thought I uploaded it but I guess I did not

here is what I have

I do
sorry for the delay.144413... thank for the help

Hi 5FDP

I have stock injectors, stock heads and stock intake, the fuel system is a returnless, set up. Fuel tank and pump are from Holley. The system is the stock DBW, all calibrated. When the car...

Hi - I'm new to HP tuners and have a problem I hope you can help me with.

I have a 1970 Camaro that I have rebuilt from the ground up. I put an LS1 motor out of a 2004 Corvette into the car...