Figured out the starting problem, this thread got me right.
https://forum.hptuners.com/showthread.php?94844-LS1-doesn-t-always-start-on-first-try-second-try-works&highlight=Cam+sync
Had a new...
Type: Posts; User: CareAutoLon
Figured out the starting problem, this thread got me right.
https://forum.hptuners.com/showthread.php?94844-LS1-doesn-t-always-start-on-first-try-second-try-works&highlight=Cam+sync
Had a new...
Last log showed 11.6v before cranking then 9.8v during cranking but it did start right up, this is control module voltage too, I haven't been checking directly at the battery.
I just added a couple grams because this thing was dipping rpms at some very light throttle blips moving it around the parking lot. I felt these numbers were because I'm not using a MAF at the...
Okay been playing with settings you guys recommended this morning and these are my results thus far.
This last time its started up great. I initially start the car after a write and it kinda sounds...
Forgot to add I also added some fuel after that first log I believe under cranking VE I was trying some different setting then reverted back to my original setting afterwards.
Hey guys I would appreciate some insight as to what could be wrong with this setup/calibration.
2000 Escalade LQ4 swapped p59 controller Speed Density OS
Truck Norris cam with BTR .660 springs ...
Most likely just an aggressive setup in the Transmission mechanically. I know from experience having too big of a hole in the separator plate in the trans will give you an aggressive shift no matter...