I returned the TF and rolling idle tables to stock and made a few scans , the first is a drive down the street where the car stalls several times on clutch in. The other two scans are idling in the...
Type: Posts; User: Deputy_Dangle
I returned the TF and rolling idle tables to stock and made a few scans , the first is a drive down the street where the car stalls several times on clutch in. The other two scans are idling in the...
I actually just read through that a few days ago. I played with the TF airflow/decay/delay a good bit over the weekend without any luck. At one point i jacked the RAF up by 5 g/sec just to see what...
Alright guys,
I have been trying to get my car to return to idle properly for over a year with no luck. The car almost always stalls on clutch in or when coming to a stop in neutral. I am to the...
What does it say in the scanner? will it log anything at all?
Your custom PID should be 100*((([PID.2811]/.332)+7.5)-[SENS.121])/[SENS.121]
EGR is pin 55 on the blue connector. Also make...
Nope.
I checked the fuel pressure a few weeks ago and it was spot on, but I may double check just to be sure. I also used the injector data supplied to me by FIC so I trust it is correct.
I've been...
I made some small changes to the VE and made a new scan. I then made another scan of the same tune and got to different results in my VE error Histo, the second hist being more lean. What would cause...
Hi guys.
I ma having serious issues with my idle and returning to idle. I have been chasing the issue since January without much luck. I've read everything I can find on the topic and...
Today I added about 60% to the the lower end of the throttle cracker table and upped the timing to around 28* around idle and lower engine speeds. The car never died on me after these changes but it...
I was under the impression the IAC counts didn't mean anything on DBW cars. Is this not true? I made another scan last night after making some changes to the throttle cracker and although the car...
Anyone have any idea's??
Also here is a scan of it dying at speed when i pressed in the clutch. Frame 1599
Hey guy's,
This is the first car I have ever tuned. I runs really well but it will randomly die sometimes when coming to a stop in neutral or when the clutch is pressed. If the rpm's do catch...