Search:

You need to turn off your fuel trims and see what the wideband says.

check your iac counts and make sure they are in line

thats what i would do

looks to me like your injector data is wrong

Fuel Pressure ?

I did a similar swap in my jeep and I had to put the speed sensor before the transfer case on the trans output shaft. I used a tone ring from advanced adapters and a universal threaded speed sensor...

I have an lq4 4l60e swap and was having trouble getting my shift points where i want then, finally I noticed with the scanner that the trans shift mode says hot shift all the time. What could be...

Thanks for the reply. That was a warm start, and i have double checked for vacuum leaks with starting fluid and cant find any. The cam is 226/236 duration .525 lift 110 LSA. Here are two cold start...

A Little update. I have figured out that if i start it up in park and before it tries to stall, put it in gear the back into park it will idle all day. At this point it will idle good until i shut it...

42748

42749

I have a cammed lq4 swapped into a jeep. I had it mated to a manual 4 speed trans and just recently swapped it for an a4 4l60e. After swapping i cant get it to hold an idle. It starts right up and...

Forgot to mention, I can get it to go into fourth with the scanner so i think it must be in my tune

Hey guys, i just got done swapping a 4l60e into my jeep. I did the LQ4 swap last year and had it mated to a manual trans. Anyway my problem is its not shiting into fourth gear. Gears 1-3 Work...