The PE is your commanded A/F at WOT. So 14.63/1.17=12.5:1. That's about what I would shoot for in that combo. Set the PE to this, and then dial in the MAF in the WOT area, to get it to that.
Type: Posts; User: edcmat-l1
The PE is your commanded A/F at WOT. So 14.63/1.17=12.5:1. That's about what I would shoot for in that combo. Set the PE to this, and then dial in the MAF in the WOT area, to get it to that.
Personally, I would set the PE to 1.17 across the board, then tune the MAF to that.
Fuel/Power Enrichment/PE throttle pedal. 1000 and 1500 cells are zero. Set them to 18 or 19. That should keep it from going back into open loop at part throttle.
Also, why is the PE table setup...
They're supposed to oscillate like a sine wave. That is proper O2/fuel trim function. It should not flat line at zero unless you're in PE, or open loop. If it is flat lining at part throttle,...