Search:

2015 2.0L amarok zf8

my15 late 2014 build 2.0L zf8hp yes im able to tune the gearbox only.
only works with the beta download.

vw did a horrendous job with the shift points with many set above the engines 4500RPM...

there is a few problems i can see..
not being able to get the car use the whole table every time you do a scan..
when PE kicks in....
unknown health of the stock o2 sensors..
fact is its...

i so wish i had a car that i could keep playing with any time i had a brainwave haha..
its a really good feeling that i got the INJ pulse multi right..

but after i did daddy cools 1st scan it...

i did mine a bit different but kinda works the same :)

cams.. ok
spark...ok
fuel.....ok

so what other areas of the alloytec are we able to tune?
or know we cant touch??
ETC limits... iv...

i think your scanner is logging INJ 1+6 so just set the 2nd as INJ 6 so you have both sides..
to get the AVG====== the top of the histogram you will see
1,2,3,4,5,6,7,8,9,10,11,12 # +,-,A,L,C...

What part of life isn't strange??? :yay:

im trying to write a filter for the spark tables..
eg i can get it to filter only exh max or intake max
but i cant get it to filter exh max and intake...

you might have this Histogram... or you might need to change the RPM and INJ pulse markers to the same as your INJ pluse MUTI in your editor.....

The thing i do :secret: is use the average short...

sorry about that... iv been a bit busy and had a few computer problems... got them fixed then iv been trying to nut out a few things with the scanner.. how to write <Filter String> on the histogram.....

just try little changes to the camshaft and see if it runs better or not.. when i was just starting learn i was putting different tunes from different cars on mine to see how it went.. i found the...

my VZ calais had FE1.5.. same ride hight as HSV FE2 was an option that i was glad i didnt have as its to harsh on most roads..
there was no LSD option but you could get it with the SV6 or...

the very 1st one i sent i did some smoothing in areas where there was a gap that i felt was in the common rev/fuelling range that had changed data around it..
the 2nd i left as is..
i found the AVG...

well its good to know iv been able to help out.. now you will be able to start chasing the power.. its good if your car tells you how much its using in fuel as i found if you set PE to kick in at 60%...

updated one..
i just use 4 histograms to plot the short term and long term on both left and right banks.. then i work out what the total trim for each rev range and INJ ms then adjust the injector...

give this a go to see if there is much improvement :)
i could only use what was on the scanner but you might be able to do a bit more after the next scan

looks like your INJ pulse multi is way out
fuel trims should be as close to 0.0 as you can get them otherwise the long term fuel trims will go way out and the computer is working hard to get the...

can you post your tune and a scan of it

your right.. manuals are slower unless you try and smash the gears..
iv got a friend with a 04 sv6 man with cold air and big exh iv been doing some work on.. running the 08 ve sv6 cam settings and...

you could always just buy a 6 speed manual.. i know there not so smooth and have an ultra tight gate that Rev,1st seem to live in the one spot (not good when there is a cop car behind you) ha ha :(...

iv driven a few VE's and fords and yeah having to flick the gear leaver is a real pain in the arse.. not safe in a tricky situation ether!!

some of the early VZ had a dodgy Trans controller.. mine...

The 5L40E is the best auto gm has ever made.. even BMW used it...
It shifts fast (but not hard).. dont clunk and bang like the old 4 speeds.. and never hunts for gears or gets confused like the...

No there is nothing you can do to get into them.. i got my HP tuners in 2009 and was told there would be more work done on the Bosch computers around mid 2010 to get more tables to tune with and to...

just letting you know it hasn't turned up in the repository yet.

but your right about more people needing to add cars to the repository, preferably that have the latest dealer firmware updates.
...

yeah done all that :) worked that little trick out a few weeks ago lol
iv set PE delay to 0.1sec
min dev 0.008
enrichment time 0.100sec
seems to take 2.5 to 3 sec for PE to kick in

iv got...

is there a way to make PE run all the time? i set mine to come on at 0 or 0.100sec but there is always a longer delay.
iv been playing around with mine to run lean below 30% load and rich 80% on but...