Hi all,
I am using AEM 3-0300 x series wb. was working fine connecting through hp scanner. unhooked my computer to make sure i was on the green connector( was wiring a tachometer to pin 10.....
Type: Posts; User: Turboz280467
Hi all,
I am using AEM 3-0300 x series wb. was working fine connecting through hp scanner. unhooked my computer to make sure i was on the green connector( was wiring a tachometer to pin 10.....
I have the AEM 30-300 x series. Gauge and sensor work great. but after installing the aem PID and transforming it to the correct analog wire. (using prolink) blue wire and brown wire to ground with...
I have a fender exit after the turbo so yeah there's not much pipe after the sensor, maybe 12 or 13" beyond the sensor.
My wideband is ran through my a/c pressure pin from the ecu. When logging my afr error is mostly 30% in the red. If I add to the ve table it doesnt get any better but I can tell its running rich plus...
I understand the ve table is wrong. What can I do to fix it? Scanner reads lean and no matter how much fuel I put into it it reads lean. I have fuel trims off until I get my fueling closer.
car is running better today since i scaled back the ve table because it was running way to rich despite the graph saying its way lean. wrong math? 135191. 135192
deka 80lb, 2 bar gm map sensor, running 55lb of fuel through my regulated return style regulator. maf has been removed but i believe the tuner set it to fail.
ok, thank you. i will check that out immediately.
can someone glance at my tune please. gen 3 4.8 stock bottom end, gt45 turbo. Was base tuned by a reputable tuner in the area. idles good, AFR looks good. while trying to get data logs car is losing...
yes before the tune i drove the car with these parts. but since tune it hasnt worked.
yes its had this problem for a while. i changed gears on the build and had to re-do the frame and floors and now im back at the motor. when i initially did the swap the car ran great, but with the...
yes same file. and by running fine i mean it will idle good.
tried that. when key is cycled it sounds like it calibrating and then nothing.
yes sir
03 ls 4.8 turbo build. car ran fine before tune. changed operating system to 2 bar SD tune and now i have no throttle. DBW. please tell me how to fix. car idles good but zero throttle response.123564
105439
hello, i need help. before my tune the pedal worked fine. ever since i started tuning i lost all throttle will only sit and idle. log shows no throttle upon pushing the pedal down. Maybe my changing...