Figured I'll update the thread but after a while of going around and doing little tweaks and such and having no luck, then the off chance it actually started, I was able to pull codes while running...
Type: Posts; User: SZMX14
Figured I'll update the thread but after a while of going around and doing little tweaks and such and having no luck, then the off chance it actually started, I was able to pull codes while running...
144281
144282
144283
Managed to have it start relatively easily first thing in the morning while cold. Heres a log file while running, along with the current tune. Only change i made with the...
Wires were crossed for the MAP sensor, reads correctly now.
Will start and run on carb cleaner after letting it sit for a while.
I'm led to believe it was having an overfueling condition yet it...
GM Genuine
Injector number is 25317628, stock 25lb injectors
Compression is good on all 8
Regardless, I have my injector flow data set up correctly in the computer so this is a real head scratcher with what's going on. It is EXTREMELY finicky. I can't think of or find any other mechanical...
Also has good spark
Pops with spray but that's it
Engine is fully rebuilt, Cam timing is set, have triple checked dot to dot with cylinder 1 at TDC, stock base circle on the cam, LS7 lifters, stock length pushrods,...
Pops with spray but that's it
Those settings put it at 30kpa KOEO and no luck in getting it to start at all
The computer was perfectly fine with 25lb injectors before the cam and turbo. This was a daily driver before the swap and had no issues with runnability and is ran with the same injectors
Actually the 25lb were stock on the 05 that computer came from, stock fuel injector data is 25.2lbs and the injectors I have are legitimate stock 25lb
Right but that wouldn't exactly help to why it won't start with its own fuel
Will try that to see if it changes anything
55567257
Blue labeled LSA/LS9 MAP sensor
Plugs do get fuel fouled at times and can smell fuel from the exhaust when it doesn't start.
Nope, still a rear mount cam sensor, gen 3 harness that originally came with the truck. Truck was running and driving perfectly fine before torn down when it was still stock
The tune file I posted might not have had my offset and linear saved when I posted it to the thread. I was playing around with linear and offset trying a few things but there has been no change. When...
No MAF codes come up when scanned
I can add it, yes
58psi
Nope, doesn't help
Flood clear doesn't help either. The "best" sputtering or attempt at starting is at about 50% throttle.
Map linear is at 305, offet had to be set at 60 in order to...
I need help with my tune as im at my wits end with it. I have experience with tuning Gen 3 LS engines for cam swaps. This current one is fighting me heavily. The usual tricks to make them start are...