7875 or gt45 have both going in 84 cutlass
Type: Posts; User: Bigbeave1
7875 or gt45 have both going in 84 cutlass
Currently have a 5.3 with a tss cam and upgraded springs in the process of adding a turbo to it will I be able to run the current cam I have?
Duration @.050 intake 216 exhaust 220
Lobe lift. ...
thanks again
im assuming i also have to copy the cranking Fuel specs also they are in green
ok thanks
Thank you :worship:
i ordered from the link you posted from ebay i will be running a return line off the regulator .should i flash with your updated tune for the first start up ?
Currently have stock truck intake and fuel rails with a 255lph holly sniper pump but will be upgraded to the 450 lph running a return line but I believe I'll need to add a boost referenced regulator...
this is the base tune ive been working on for first start up on the gen3 5.3 haven't got injectors delivered yet mind taking a look?
128785
blindsquirrel not to hijack the thread but im in the same boat 5.3 turbo swap wondering what injector data i needed for the ebay injectors i also got a set new to tuning what would i need to copy...
Hi im new to tuning have a 99 5.3 swap in my 84 cutlass 2.5 exhaust tss 216/220 500. lift cam 2800 stall 4l603 mail order tune here is the issue car starts and runs when up to temp if you crack...
Hi
I've installed an intellitronics digital dash in my ls swap cutlass I was wondering the pcm puts out 4,000 pulses for an output . the gauge cluster needs 8,000 pulses can I just change the...