There is a Speed Density How-To thread that is about 2 years old now, about a gagillion pages long. It used to be a sticky, but I cannot find it. Thanks in advance.
robert
Type: Posts; User: ramjudd
There is a Speed Density How-To thread that is about 2 years old now, about a gagillion pages long. It used to be a sticky, but I cannot find it. Thanks in advance.
robert
good suggestions, and I have been monitoring these pids closely. ROCK STEADY. I mean totally solid MAP, g/cyl, timing, AFR, TPS, etc. This is what makes this problem so difficult to solve. And even...
Hey guys
Good thread going. I'd like to figure this issue out!! I have tried everything except set the Throttle Craker Enable to 100 and Disable to 20 per A&A tuning as posted a few entries up. I...
As I indicated, stock LS6 intake/TB and have the Base RAF scaled +5 and Park IAC +3
one of the remaining issues I am dealing with on this install and tune- car starts up nice (finally), rpm comes down smoothly to setpoint of 950rpm, but then tanks down to nearly stalling. it will...
EC
Thanks for the 411!! the advice has affected some change but let me ask you, where should I have the Enable and Disable speeds at? Leave them default? Anyway, 0-32mph/400-1000rpm portion of the...
When creeping through a parking lot at 10mph or less, car bucks like crazy. I just put this big stroke 418 LS2 in a 2001 ZO6, HUGE cam = 258/266 .647 113lsa. I've been out of the tuning loop for a...
yes, I did. The only way to get this feature turned off in the programming is to take the car in to a dealer that has a Tech II. The feature IS in the Tech II, I know this for a fact. But I had to...
Thanks Cat!!
Remind me again the VATS relearn procedure. My All Data has the procedure but if I recall this is done easily with HPT?
Chris;
could you clarify/reiterate how to disable the trims?
could you also be a little more specific about the initial VE table tuning regarding how we aim to tune it to 13.0:1 with wide band,...
2004 A4 C5 tuned in SD mode. During decel coming to a stop light and such, the engine will buck and kick, getting worse the slower the car (rpms) are running. Car runs really well otherwise. Car has...
doesnt answer my question. I'm aware I can take the laborious time of copy/paste...this is what I want to avoid. I really want to quick check a previous tune that worked well on another similar...
2004 A4 C5 tuned in SD mode. During decel coming to a stop light and such, the engine will buck and kick, getting worse the slower the car (rpms) are running. Car runs really well otherwise. Car has...
Afterstart enrichment tables? which are these?
I will get another log here soon to you if I dont figure it out in mean time. Thanks Chris!!
Robert
www.gen3motorsports.com
The solution is likely simple, but I keep missing the mark by **this** much.
the symptom: upon start-up, engine RPM initially runs up to 1500rpm (normal) then drops down very low, almost (or...
hey 12sec, wazzup!
Hey, different subject: you interjected a great deal on my other post last week with that 3-4 Cruise/Normal upshift TCC unlocking issue that caused engine RPMs to spool up...
Yes, I can overwrite the VIN, that's not my question. I am curious if that is all I need to do to use a whole other bin file from another car. The segment and checksum IDs are not the same even...
Just curious if I can utilize an entire bin file from a different car, but same year, make and model. I recently SD-tuned a 2004 A4 Corvette after cam install. I just duplicated the mod's on another...
Just curious if I can utilize an entire bin file from a different car, but same year, make and model. I recently SD-tuned a 2004 A4 Corvette after cam install. I just duplicated the mod's on a...
Turns out with SD tuning even this cam is small. Cam works well even with the stock 2.73s and stock TC.So if one wished to maintain their stock drivetrain, I would even consider this cam on the small...
customer says he never felt this before when car completely stock. So, the big cam is amplifying this condition?
I will try to disable lockup in third.
Customer is doing mods a little at a time,...
230/234 .600 113 +4, stock 2.73s, stock TC
All my scanning shows just fine. Tech 2 Misfire tests all good. No misfire. This 'unlock' only happens 1-2 sec after the 3-4 shift under light load...
The only changes I made to the Tranny tables were to both WOT shift speed vs shift tables and both WOT shift RPM vs Shit tables. No other changes, not even to TM (customer's preference; wants stock...
2004 C5 A4 + big cam: when driving in cruise mode the tranny upshifts nicely through all gears up to the 3-4 shift. After it shift into 4th everything seems fine then about 2 sec later the engine...
OK. Then what? Are you saying the monitoring system can be disabled by accessing this PDM and doing something to it? Thanks.
Robert