Search:

Ok that?s great, I have an aem wide band but no module so no logging with that yet

screen shot

im having trouble with it populating on the graph. Ill put a screen shot in here

Cant seem to figure out why the maf wont log. Probably missing something, trying to tune the maf on my 04 rcsb lq4 with a btr stage 2 cam. any help is appreciated.

you win this time. What else do you need to see ?

my first attempt at a ve table to smoothen up my 6.0 ly6 swaped 11 sierra 1500. let me know what you think and what i could work on.

I?m using a couple of 07-09 2500hd and vmax stock tunes trying to get this right. It?s an 11 flex fuel truck do you think using the 2011 53 injector tables would work for the 6L.
Or should I be...

6.0 swapped 2011 1500 sierra. Power from a stop seems low logged a drive and found every once and a while it pulls alot of timing. 11m38s in it pulls 9 degrees and is just sluggish from a stop. i...

Lc9 to ly6 swap truck runs great but off the hop seems to be a little off. anything to change in the tuning to help with torque down low. once the truck gets going its great and you can feel quite...

Here is the swap tune

The only thing I didn?t change was the throttle body parameters. I?ll post the tune here shortly

Swapped my truck runs and drives great. Remote start and starting with the key the truck seems to idle low when it starts, how would I adjust the idle for the initial start ?
2011 1500 Sierra LC9...

hey guys im doing a swap on my 11 sierra. engines at the machine shop and am preparing a tune for it.
i found 2 tunes 1 is a 2008 2500hd the 2nd is a 2009 silverado vortec max. the vortec max is a...

Great thanks for the help

Hey guys have a 11 1500 sierra with the lc9 5.3, swapping the engine for the ly6 6.0 and can see that since the engine is from a 2007 2500hd its an e38 ecm which is the same as my lc9 5.3. I should...

Ok thanks for that. i still have the vvt table active in this tune so at that rpm i believe thats where the extra timing is coming from. I lowered the table back to stock with 2* added throughout the...

how do you set the table to make those changes?

Do you think it would be the same power with a few degrees removed? At what point does too much timing not make more power ?

2011 gmc sierra ccsb 5.3 6l80 running 91 octane. stock intake with single in dual out muffler. curious what changes people would make. truck runs good with low kr. No audible knock but hoping for...

11 ccsb 5.3 6 speed has no knock after adding some timing. ran strong but could hear the knock. curious if changing the pe eq ratio table from 1.167 to 1.195 would help ? thanks in advance109167

Thanks but it says there was a software issue when i tried to open it. I have been able to open other tunes from other posts. Problem on my end or yours ? did you happen to look at the tune i had...

upgraded to a new truck from a 09 4.8 4l60 to 11 5.3 6l80. messed around with the tune on the 4.8 for a while and interested if you guys can take a look at the one i am trying for this truck. trying...