I changed my AFR for e10 from what I was using 14.22 to 14.42. Thought maybe 14.2 was a bit rich and our gas is 'up to 10% eth' according to the stations. So stock was 14.68 on my truck. I figured I...
Type: Posts; User: mikz86ta
I changed my AFR for e10 from what I was using 14.22 to 14.42. Thought maybe 14.2 was a bit rich and our gas is 'up to 10% eth' according to the stations. So stock was 14.68 on my truck. I figured I...
Try a S10 same year. Just remember (IDK if it matters) GM swapped from poppets to mini-injectors in 2002 IIRC. Also know if you have EGR and/or AIR....compare to the S10 year if it had it or not. I...
Seems to speak of that is more referring to a vehicle that you are doing a motor swap into or a fresh project. Yet seems (correct me if i am reading into it too much) that a vehicle that is already...
I agree. Other than the Help Guide I found by accident on Google, I think there is a need for explaing DFCO in replation to changes in re-gearing a vehicle and other mods that can affect the stock...
One odd issue I have is that I wanted to raise the DFCO enable temp cause I get a nasty 'pop pop' in the exhaust in the mornings when the eng temp is not high. I have a muffler and dump, so its a...
The trouble I get even with stock tune and cam is the decel pop-pop. I really want to get that reduced yet still have DFCO.
There is a sticky guide OP that has the basics on DFCO
I read in the banish book about the 'Table of zones'. In zone7 its like the area where when u were on the throttle and let off (low tps, high rpm). Well in my Timing section, the area that would be...
Ok I will try the entry/exit MAP idea.
The rpm vs. mph I will have to check on. The only thing I had changed was RPM vs. Gear which I raised hoping that would translate to reducing the DFCO entry...
Def good info to know but I run a stock cam. for now. And even if I do run a bigger cam it wont be too big because I will be supercharged by then :)
I doubt if going from 1.5 ratio rockers stock to...
I am relatively new to the tuning but not to working on cars. Honestly I never heard of DFCO until I got a tuning program and started reading threads. I dont have HPT yet but plan on it after tax...
anyone?
Hello, I am Michel. I have a 2003 S10 4.3L Reg Cab. Mostly bolt ons like headers, exh, catless and intake. The only big mod was 1.52 roller rockers.
I dont yet have HPTuners but am trying to get...
I am looking to buy one of a couple different used HPTuners MVPI scanner/tuner programs and cables. I have a AEM UEGO wideband gauge and it has the aux output to connect for wideband. I already set...
I am curious about this too but I am a buyer not a seller.
How much ru asking for it and how many credits left?